User's Manual

LCD KVM Console User Manual
57
 The machine can’t be operated normally as instructed by the operating instructions.
 Adjustment only for the control functions covered by the operating instructions, and other inappropriate
operations may cause damage, requiring more qualified personnel to perform repairs
Cabinet Installation
 Before cabinet installation, make sure that the fixing device is securely fastened to the rack and
extended to the ground. The weight of the whole rack can be dispersed on the floor. Mount the front and
side securing devices in a single rack or the front-end fixtures in combination with multiple racks before
starting rack work.
 Install from the bottom to up in the cabinet, and install the heaviest things first.
 When extending the equipment from the rack, make sure that the rack is stable and stable.
 Be careful when releasing the latch by pressing the device rails and sliding the unit into the rack. The
track of the slide rail may clip to your finger.
 After mounting the device to the rack, carefully spread the rails to the locked position, and then slide
the unit into the rack.
 Do not overload the AC supply branch circuit that supplies power to the rack. The total load capacity
of the rack should not exceed 80% of the branch circuit.
 Make sure that all equipment used on the rack - including electrical outlets and other power
connectors - is properly grounded.
 Make sure you have provided proper airflow for the equipment on the rack.
 Make sure that the operating temperature of the rack environment does not exceed the maximum
operating temperature set by the manufacturer.
 Do not stand on or stand on any other equipment while you are servicing other equipment on the rack.
WARNING: Slide / rail (LCD / KVM) mounting equipment can not be used with support brackets or
work areas.
Specification
VGA Series LCD KVM Switch Specification