User's Manual

4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual

Manual switch selection

Please use the buttons on the front operation panel to make a port selection.

OSD menu screen selection

(Please refer to the relevant chapter of the OSD operation for more information.)

Hot key selection

This product provides four hotkey switching modes:

[SCRLL] + [SCRLL] + [NUM]

[CTRL]+[CTRL]+[NUM]

[ALT]+[ALT]+[NUM]

[SHIFT] + [SHIFT] + [NUM]

The default hotkey switching combination key is [SCRLL]+[SCRLL]+[NUM],in which [NUM] is the

keyboard number 01-16, and the keyboard combination hotkey is input and carriage return to complete the

command sending, and the KVM switch will switch the corresponding number port computer. If you want to

change the combination key of hot keys, you can make settings and changes in the corresponding options in

the OSD menu. (Please refer to the relevant chapter of the OSD operation for more information.)

Power off and restart

If you need to turn off the power of the KVM switch, please perform the following operations before

restarting:

1. Pull out the power supply connected to the KVM.

2. Turn off all computers connected to the KVM switch.

3. Wait about 10 seconds before reconnecting the power supply of the KVM switch.

4. Turn on your computer power supply.

Chapter

Ⅳ OSD operation

OSD introduction

You can use OSD screen menu function and screen menu operation mode to perform KVM device setting,

switching selection of the connected devices and other operations. By the keyboard operation to complete