User's Manual

4, 8, 16-port USB/PS2 rack-mountable KVM switch user manual

1. To use the name method, move the cursor to the “NAME” option through the keyboard button, and then

press the [Enter] key, the input box of “NAME” appears at the bottom of the window. You can enter the

name of the port to be switched in the box. Then press [Enter] key again, the KVM switch will directly

switch to the corresponding port computer of the name you enter.

2. To use the connection port method, move the cursor to the “PN” option through the keyboard button, and

then press the [Enter] key. The input box of “PN” appears at the bottom of the window. You can enter the

serial number of the port to be switched in the box. Then press [Enter] key again, the KVM switch will

directly switch to the corresponding computer of the port serial number you enter.

Note: 1. You can enter an incomplete name or number. The screen will prompt invalid input until you exit or

re-enter the correct input before performing thecorresponding switch selection operation.

2. In the “PN” port input box, only numbers are allowed to be input. If other characters are input, they will

be regarded as invalid input, and the warning sound issued by the device can be heard.

To return to the main menu without making a selection, press the [Esc] key to operate.

F2 SCAN

Press the [F2] key to start the SCAN function. The SCAN function can allow the KVM device to switch the

connection port by automatic timing. You can set and check it according to the set time interval. To end the

SCAN scanning, please press the spacekey to exit the scan mode. The factorydefault time interval of two

port scans is 5 seconds (please refer to the description of [F6] function settings for modification).

F3 LIST

Press the [F3] key to start the LIST function. This function can display the port according to the mode that

the user wants to display. It is convenient for the user to quickly and selectively check the corresponding

port according to the common habits. The modes provided areas shown in the following table: