KI-4101 Quick Installation Guide 1. Hardware Specifications KI-4101 Product view: 2 1 3 4 5 1.Reset: Press this button to restart KI-4101 device 2.Restore factory settings button: Long press button for 5 seconds KI -4101 ( IP address, user name , login password) can return to the factory default settings 3.Network interface: Can access the WAN ( wide area network ) or LAN ( Local Area Network) with 1000M 4.Power indicator: After the power is turned on,his indicator lights 5.
Read this manual thoroughly and follow the installation and operation procedure carefully to prevent any damage to the unit, and/or any of the devices that connect to it. 3. Installation Steps BEFORE INSTALLATION 1.Make sure that power to all the devices you will be connecting up have been turned off. 2.To prevent damage to your installation, make sure that all devices on the installation are properly grounded. INSTALLATION 1.
. log save up to 1000 5. Software Specification and installation 1.Software was burned in the CD attached with product. 2.Install as following steps: Find the folder “IP KVM” and install it successfully; then connect well all the devices; Plug in the product and connect to network, the default IP address is:192.168.0.10. Using one PC which in the same network segment and enter “http://192.168.0.10”in the browser and hit ENTER to access.
Disable the "Enhanced pointer precision" option; Click OK Windows 2000 Settings To configure KVM target servers running Microsoft. Windows 2000. operating system: i. Choose Start > Control Panel > Mouse; ii. Click the Motion tab; iii. Set the acceleration to None; iv. Set the mouse motion speed setting to exactly the middle speed; v. Click OK To configure KVM target servers running Linux. (graphical user interface): i. Choose Main Menu > Preferences > Mouse. The Mouse Preferences dialog appears; ii.
Note: If these steps do not work, issue the xset mouse 1 1 command as described in the Linux command line instructions; SUSE Linux 10.1 Settings Note: Do not attempt to synchronize the mouse at the SUSE Linux. login prompt. You must be connected to the target server to synchronize the mouse cursors. To configure the mouse settings: Choose Desktop > Control Center. The Desktop Preferences dialog appears; Click Mouse.
WEB server operation i. Login and using of WEB Server Enter “http://192.168.0.10”in browser and click ENTER to access and will appear below login interface. The default user name is admin, and password is admin. Password can be revised after login. ii. Operation instructions After login, the main interface will appear as below. Users can operate base on corresponding authority. Five function options on the function line of the left of main interface: Console, User, Log, Network, and System .
Console: Click on the left to modify equipment description or register information, as below picture. 7 User: Mainly for user management, include three grade: Super Administrator (only one and couldn’t be deleted), Administrator, User. User system include three group which can be made base on actual using condition. Higher grade user can add, delete or modify lower grade user. It can be done by modify as below picture.
8 Log: Support many kinds of log query and log detail as below.
Network: Some information of server like IP address, UID, name, etc, which can be modified.
Login After loin Console interface, click “”image in dongle interface for KVM session, as below. International standard DES is used in this software to encrypt user data, to avoid data leakage and guarantee security. After login, system will automatically calibrate mouse. If it fail, please click “ operate manually. Click “ “ ”image on left to ”can make display in full screen. If the mouse doesn’t work, please click ”to get control authority in idle period of equipment and authority.
Click “ ”can hide local mouse. “ ”is remote hotkey editing button, click for a popup to add hotkey as below picture. Click“ 11 ”can choose remote shortcut key directly to operate the controlled machine.
6. Specification Product number keyboard mouse Control port video keyboard mouse Input port video Power supply port KI-4101 Reset LED indicator network re-connect Initialize IP module default IP address, administrator name and initial password Power indicator Max resolution Power Supply 1920 x 1080@60Hz DC 12V 1000mA Operating temperature 0-50˚C Storage temperature -20℃-60℃ Housing Weight metal 0.