User's Manual

2
Read this manual thoroughly and follow the installation and operation procedure carefully to prevent
any damage to the unit, and/or any of the devices that connect to it.
3. Installation Steps
BEFORE INSTALLATION
1.Make sure that power to all the devices you will be connecting up have been turned off.
2.To prevent damage to your installation, make sure that all devices on the installation are properly
grounded.
INSTALLATION
1.Using end of KVM cable to connect PS2 keyboard,PS2 mouse and monitor port on panel and other end
of KVM cable to connect corresponding port of controlled computer.
2.Using one end of crystal head of CAT5 UTP to plug RJ45 port on the switch panel.
3.Using other end of crystal head of CAT5 UTP to plug router or network interface which control PC in
the LAN
This completes the installation, and you can turn on the power to the computers.
4. Installation Diagram
Remark：
1. default user name：admin ; password：admin; default IP address is:192.168.0.10.
2. product can be stored up to 50 user names and 5 user names can on line at the same time