User's Manual

• User manual

1. General Description

Tire pressure sensor is composed of RF chip, battery, antenna and Rf

matching network. It is applied to monitor tire pressure, temperature and

acceleration and the tire data is transmitted via center frequency 433.92MHz

&315MHz.

2. Operation Functions

Transmitter ID Programming: transmitter ID can be programmed for easy

replacement

Standard Pressure Programming: standard pressure for each tire can be

programmed on monitor

3. Product Features

Powerful functions including low pressure alarms in 3 levels,fast leak alarm

and standard pressure setting etc.

Monitor connects to continuous power to ensure full-time monitoring

Design of the whole system matches the truck perfectly

Simple operation for function programming and inquiry

4. Operating condition

Input Pressure Range

100kPa to 900kPa

Supply Voltage

2.1V to 3.6V

Operating

Temperature

-40℃ to 125℃

Z-axis Acceleration

-360g to 400g Max

RF Frequency

Both 315MHz and 433.92MHz

5. Installing structure

6. Installation requirements

4. valve cap

3. nut

2. cushion

1. Valve rod

TPMS Sensor

PAGE 1
• User manual 1. General Description Tire pressure sensor is composed of RF chip, battery, antenna and Rf matching network. It is applied to monitor tire pressure, temperature and acceleration and the tire data is transmitted via center frequency 433.92MHz &315MHz. 2. Operation Functions Transmitter ID Programming: transmitter ID can be programmed for easy replacement Standard Pressure Programming: standard pressure for each tire can be programmed on monitor 3.
PAGE 2
• User manual moment:3.8N.m(±0.3N) Tires must do dynamic balance testing and adjusting.
PAGE 3
• User manual Federal Communications Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 4
• User manual Canadian Compliance Statement This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device Le present appareil est conforme aux CNR d’Industrie Canada applicable aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: 1.