Caller ID Box User Manual

5
Inserting the batteries into the CID100 unit
1. Use two thumb's nails simultaneously in the backward slots and open the lid.
2. Insert four size AA batteries by matching the diagram inside the
battery compartment.
3. Cover the lid.
Batteries are used to back up memory and reception of ID message, if AC
power Is absent then TV screen will not display ID message.
Hook up the wire of Video between VCR, the CID100 unit and the TV.
1. Unplug the wire of video signal that comes to the TV video input which
comes from VCR's video output. And plug this one to the video input of
the CID100
2. Use video wire that is provided with this unit, plug one end into video output
of the CID100. Plug the other end into video input of TV.
If the TV set has more than 1 video input, beware of which one is selected