Instruction Manual

ENG
5
GC-2040
Operation Manual
8. CONNECTION AND INSTALLATION
• Connect the USB receiver to an available USB
port on the computer.
• Download the software from the official site
from the product page and run the program
«SVEN Gamepad.exe».
• In order to test and configure the gamepad,
choose «Control Panel» «Devices and Printers», in
the Windows control panel (in the «XInput» mode,
the gamepad is displayed as «Xbox 360 Controller
for Windows», in the «DirectInput» - «PC / PS3 /
PC360 / ANDROID»), then right-click on the device
icon and select. Gaming device parameters
(administrator rights may be required) (Fig.5,6).
The «Game devices» window will appear. In
XInput mode, the gamepad is displayed as
«Controller (XBOX 360 For Windows)» (Fig. 7),
in the «DirectInput» mode - «USB Vibration
Joystick (BM)» (Fig.8). To switch between the
«DirectInput» and «XInput» modes, you must
press the HOME button for the 6 seconds. In the
«DirectInput» mode, the second left LED lights up,
and in the «XInput» mode - the 3rd LED lights up.
• To check and configure in «XInput» mode, select «Properties» in the «Game devices»
window, the «Properties: Controller (XBOX 36 ...» window will pop-up (Fig.9). In the
«Verification» tab, you can check the execution of commands when you press the buttons
and rotate the joystick. To calibrate the joystick, select the «Settings» tab, click «Calibrate»
and follow the instructions.