Owners Manual

CONNECTING & CONTROLLING YOUR SUBWOOFER
Enable and adjust the on-board low pass filter of the PB16-Ultra for a smooth blend with the
main speakers.
NOTE: For additional guidance on speaker/subwoofer crossover settings, please consult our Sound
Experts or our Merlin subwoofer matching tool at www.svsound.con/merlin.
www.svsound.com • [e-mail] • [phone]
3V-12V Trigger Input
This feature will automatically turn the subwoofer on/off when a signal is sent to the trigger input
from another component in the system (typically the pre/pro or AV receiver). The other compo-
nent in the system must be equipped with a trigger output feature and requires a TS 1/8” mono
LINE LEVEL OUTPUTS
REAR FRONT
R
L
RECEIVER/PREAMP
owner’s manual | page 7
1/8” TS
MONO CABLE
Line Level Connection – Stereo Receiver or Preamplifier Left/Right Channels (cont’d)
PB16-Ultra
SUBWOOFER