PC-2000 Pro OWNER’S MANUAL
Congratulations on bringing home one of the finest subwoofers ever made! The SVS PC-2000 Pro Subwoofer embodies all the technology and engineering advancements made since we developed our first subwoofer nearly two decades ago. You can feel proud knowing your SVS PC-2000 Pro Subwoofer was masterfully engineered to deliver the deepest, most powerful, accurate and detailed bass experience possible.
CONNECTING & CONTROLLING YOUR SUBWOOFER SUBWOOFER The SVS PC-2000 Pro is designed for easy set-up and integration in both multi-channel home theater and two-channel (stereo) systems. It is best to familiarize yourself with the subwoofer connections and the rear panel of your AV receiver or preamplifier before setting your subwoofer up. Be sure your PC-2000 Pro is switched to Off before plugging it in or connecting to your AV receiver.
PC-2000 Pro SUBWOOFER CONNECTING & CONTROLLING YOUR SUBWOOFER 1 AC Power Cord Receptacle 2 On/Off Switch - Turns Subwoofer On/Off 3 3V-12V Trigger Input - This feature will automatically turn the subwoofer on/off when a signal is sent to the trigger input from another component in the system (typically the pre/pro or AV receiver). The other component in the system must be equipped with a trigger output feature and requires a TS 1/8” mono cable (pictured below).
PC-2000 Pro SUBWOOFER CONNECTING & CONTROLLING YOUR SUBWOOFER AC Power Connection Connect the subwoofer power cord to the subwoofer amplifier and directly into an AC outlet. Convenience outlets located on the rear panel of some AV receivers or pre/pros are NOT recommended for your PC-2000 Pro as these outlets are not meant for high power devices.
PC-2000 Pro SUBWOOFER CONNECTING & CONTROLLING YOUR SUBWOOFER Line Level Connection – Stereo Receiver or Preamplifier Left/Right Channels (cont’d) RECEIVER/PREAMP LINE LEVEL OUTPUTS REAR FRONT L R + 30Hz LINE LEVEL R INPUT OUTPUT L 0° 40Hz _ LOW PASS 60Hz 90Hz 140Hz 90° VOL LFE LOW PASS 180° PHASE PHASE LFE Enable and adjust the on-board low pass filter of the PC-2000 Pro for a smooth blend with the main speakers.
PC-2000 Pro SUBWOOFER CONNECTING & CONTROLLING YOUR SUBWOOFER Connecting Multiple Subwoofers or “Going Dual” Running two or more subwoofers has many acoustic benefits such as: improved frequency response throughout the listening area, fewer peaks and nulls, increased output and decreased bass localization. The RCA Outputs provide an easy way to integrate multiple PC-2000 Pros or other subwoofers into your audio system. Many AV Receivers and Surround Processors have more than one subwoofer output.
PC-2000 Pro SUBWOOFER CONNECTING & CONTROLLING YOUR SUBWOOFER Connecting Multiple Subwoofers or “Going Dual” (cont’d) In a 2-channel system you can set up Stereo Subwoofers, where one is used for the Left Channel and one for the Right Channel. Typically, the subwoofers will be symmetrically placed according to your speakers. And be sure to maintain all the correct Left and Right output and input connections to ensure optimum performance.
PC-2000 Pro SUBWOOFER CONNECTING & CONTROLLING YOUR SUBWOOFER Control Settings for AV Receiver & Processor If using your PC-2000 Pro subwoofer with an AV Receiver or preamp with bass management, it is recommended to leave all control settings in the default position, aside from the volume, which allows you to adjust the level of output based on your personal preferences.
PC-2000 Pro SUBWOOFER SUBWOOFER ROOM PLACEMENT Placement of subwoofers is a process driven by competing variables that differ in every home. Décor, floor space, furniture, speaker placement, seating location, and of course, sound quality all factor into the decision of where a subwoofer should be placed. If you have flexibility, there’s an artistry to subwoofer placement that can be aided by understanding some basic acoustic principles and set-up techniques.
PC-2000 Pro SUBWOOFER SUBWOOFER ROOM PLACEMENT Front Placement Front of the room placement in between or just to the side of the front channel speakers is another common choice. Front of the room placement usually results in the best blending with the main speakers and center channel and minimizes localization effects. Side Wall Placement Side wall placement is less frequently used but can be an effective subwoofer location for excellent accuracy and output.
PC-2000 Pro SUBWOOFER SUBWOOFER ROOM PLACEMENT Dual Subwoofer Placement Based on our own extensive testing, and research done by the professional audio community, we recommend the following placement options for dual subwoofers: • Opposite diagonal front/rear corners. • Front stage in the corners. • At the mid-points of the side walls. • Front stage flanking the center channel to the inside of the main speakers.
PC-2000 Pro SUBWOOFER SUBWOOFER CONTROL OPTIONS Your SVS PC-2000 Pro Subwoofer can be controlled from the new SVS Mobile App or via the rear panel for unprecedented flexibility when optimizing performance for room layout, speakers, system set-up and more. SVS Subwoofer App Our groundbreaking SVS Subwoofer DSP app is available for free via the Apple® App® Store, Google Play™ Store and Amazon Appstore. Just search “SVS App” and follow the prompts to download to your mobile device.
PC-2000 Pro SUBWOOFER ADVANCED SUBWOOFER CONTROLS Volume Adjust to make your system’s low end more powerful and extended while remaining accurate. The subwoofer should sound like it’s naturally adding bass for all the speakers without overly drawing attention to itself. Different content has different levels of output so it’s normal to adjust volume based on source material and your personal listening preferences.
PC-2000 Pro SUBWOOFER ADVANCED SUBWOOFER CONTROLS Port Tuning (SVS App Only) Port blocking allows custom tuning of your PC-2000 Pro Subwoofer based on listening preference by exchanging max output for low frequency depth and quickness. Foam port plug is available upon request by emailing custservice@svsound.com. When using the feature, always match port blocking with the selected tuning via the SVS Subwoofer App.
PC-2000 Pro SUBWOOFER ADVANCED CONTROLS FEATURE TABLE FEATURE OPTIONS & RANGES FEATURE RANGE / OPTION Volume -60dB – 0dB (1dB/step) Low Pass Filter LP Frequency: LP Slope: Phase 0° – 180° (1degree/step) Polarity Positive (+) / Negative (-) Parametric EQ PEQ Frequency: PEQ Boost: PEQ Q Factor: 20 – 200Hz (1Hz/step) -12.0 – 6.0dB (0.1dB/step) 0.2 – 10.0 (0.
PC-2000 Pro SUBWOOFER • • • • • • • • • • • • • • • • • • • SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
PC-2000 Pro SUBWOOFER FCC & IC COMPLIANCE FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device must not be co-located or operating in conjunction with any other antenna or transmitter.
PC-2000 Pro SUBWOOFER CLEANING & CABINET CARE INTRUCTIONS Your SVS Subwoofer may be gently cleaned as follows: • Use a dry microfiber duster to remove any loose surface dust. • Use a water-damp microfiber cloth to remove fingerprints, smudges and other contaminants. Wipe in one direction only, with the grain if applicable. • Follow any damp cleaning immediately with a dry microfiber cloth. Again dry wipe in one direction only, with the grain if applicable.
