Quick Start Guide

Once your Prime Wireless SoundBase is set up, you can access music from your devices and your favorite streaming services. You
can also enjoy full resolution Critical Listening Mode Critical Listening Mode, create a multi-room audio system, and more.
1 42 53 6
Congure Play-Fi App
Open the Play-Fi app and follow the
prompts to nish setting up your
Prime Wireless SoundBase on your
home Wi-Fi network.
Note: The Prime Wireless SoundBase may require an update before letting you stream music. The Play-Fi app will show a notication and complete the update
automatically. This is normal and can take 3-5 minutes.
If your SVS Prime Wireless SoundBase is not being discovered by the Wi-Fi network, try moving it closer to your router or to a stronger signal area to establish a connection.
Also, make sure the speaker and app are both congured to the same Wi-Fi network in your home.
Select “Set Up Play-Fi
Device”
Choose a name for your Prime
Wireless SoundBase.
Choose “Set-Up” to congure
your Prime Wireless SoundBase
and Wi-Fi network.
Select new device name
from Play-Fi menu.
Enter your Wi-Fi network
password and select “Next”
Select your favorite
streaming method/service
 iOS users must go to the
“Settings” -> “Wi-Fi” and connect
to “PlayFiDevice...” like you would a
normal Wi-Fi network.
 Android users skip to step 4.
Connect Prime
Wireless SoundBase
to Wi-Fi Network
Once powered on, the Prime Wireless
SoundBase will automatically go
into Wi-Fi setup mode, indicated by
a rapidly blinking yellow light on the
rear panel
9
. When the blinking
light slows down, it’s ready to connect. Wi-Fi connection is
conrmed when yellow light remains on permanently.
Start Prime
Wireless SoundBase
Wi-Fi Setup Mode
Search “Play-Fi” and download the
free DTS Play-Fi app to unlock the
full functionality of your SVS Prime
Wireless SoundBase.
Download Play-Fi App
Power Cord
Included
Accessories
Welcome!
Congratulations on bringing home the SVS Prime Wireless
SoundBase, a stunning achievement in sound quality and
home audio connectivity. We know you are eager to start
playing so this Quick Start Guide will walk you through the
various controls and connections and get you on the fast
path to enjoying high-resolution wireless streaming of your
favorite playlists and music services.
BA
Setting Up Wi-Fi and the DTS Play-Fi App
Source &
Preset Control
Rotate the knob to change the input.
Press the knob to select a preset
(after they are programmed).
A
B
Front Panel Display
LED backlighting indicates the
selected audio source (Wi-Fi,
Bluetooth, Optical or Auxiliary) and
preset (1-6).
C
Play, Pause
& Volume Control
Rotate the knob to adjust volume.
Press the knob to pause/un-pause.
D
Headphone Output
Connect headphones for private
listening.
C D
1
1. Connect Left and Right speaker cables to +/- terminals on
your loudspeakers.
2. Connect speakers to matching Prime Wireless SoundBase
Left and Right +/- terminals
1
via bare wire, banana plugs
or spades.
Connecting Speakers to Prime Wireless SoundBase
1. Connect RCA interconnect to proper input on AV receiver or
Preamp Input.
2. Connect opposite end of RCA Interconnect to SVS Prime
Wireless Soundbase RCA Output
7
.
Connecting Prime Wireless SoundBase as a Source for an A/V Receiver or Preamp
Left Speaker
Right Speaker
7