Manual of Smart Watch LOGIC LIFE 20G Please refer to this manual before using the product V0.1 1. Notes 1.
any further notification. It is normal that some functions may vary in certain version of software. 1.2 Please charge this product for more than 2 hours before using it. 1.3 You should open the battery cover for fixing SIM card and T card. (corressponding screws and screw drivers are included in the package), and try not to unfix the battery to avoid difficult assembly when the package is disassembled. Please power off to operate when SIM card and TF memory card is fixed.
2.Product Overview 2.1.Basic introduction 2.2 Operation of this product 1. When the watch dial displays, press your finger on it, and then drag to the left to enter the main function menu, slide up and down to drag the menu shift and scroll, drag to the right to return to the previous page of the menu. The drag-distance should exceed half of the display screen, if the drag-distance is too short, it may be mistaken as a click. Click the icon to choose corresponding function.
Method 1: Power on and long press the screen (non-function area) at the idle screen, and then you could enter the interface of clock type choosing interface, so you can change the display effects of the watch dial by left and right drag according to your own needs. Method 2: Function options such as “menu-setting-clock -clock types” , enter it, and then you will be able to select your favorite watch dial. 2.
software for Apple, and you need to input your Apple ID and password. Note： 1. During use, this program is only used for synchronization between watch and cellphone, and no cellphone network traffic will be consumed. 2. Although the traffic is consumed during the process of downloading program, it is recommended that download should be done in wifi model. 3.
3.3.1 Connect the watch from cellphone Enter cellphone settings-BT settings-open BT.Click on the search equipment and click selection and pairing when the smart cellphone watch device is found, then also choose “Yes”on the watch, the pairing is successful. (Note: it should be confirmed whether the device can be searched).
When the cellphone receives other party's phone call, the cellphone will let out a reminder by phone ring, and the screen will display the phone number or name of incoming call( incoming call display service should be opened). User can decide whether to answer or hang up the phone call according to the reminding of icon on the interface. If you need the digital watch dial during the process of calling , pull the screen to left, and the digital keys can be called out. Phone call records: 1.
there are a lot of BT devices around circumference, search cell phone by using BT dialer. The connected equipment can be paired and deleted. Remote notice: Display information synchronized from the cellphone, such as QQ, Wechat, SMS, text message, time,Twitter, and Facebook, etc. Remote photo-taking: Control from cell phone and take pictures by using cell phone camera. Note: The taken pictures can be saved in cell phone and can be browsed through file manager of cell phone.
about in due course. It is suggested that you should get out of bed and move about once per hour, the default reminding time is half and hour. Two-dimensional code Scan two-dimensional code, the synchronized software can be downloaded. If the software of new version needs to be upgraded, the corresponding update can be carried out through scanning and downloading again. Note: Some scanning softwares may not be opened, you can try to change scanning tools.
two-way antilost enables, the scout function can not be used without connection again. 4.4. During the process of use, the BT will disconnect occassionaly. Please connect once again.(It should be connected once manually when it is disconnected when it exceeds five minutes.) When it is connected, please pay attention to select to agree the synchronization of telephone, or the phone contacts will not be displayed, neither the related remote control function. 4.
Battery power is too low. Please connect charger to charge. Watch will power off automatically. Battery power is too low. Please connect charger to charge. 6.3. The time of using watch is very short. The battery power is not charged fully. Please make sure there is sufficient charging time.(the shortes charging time is 2 hours.) Use SIM card. But the signal of using location is too poor, it causes large using current of cell phone. 6.4. Watch can not be charged normally.
Product IMEI code Customer address Sales address Abstract Date Fault phenomenon Overhaul Remarks
Warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
