User's Manual

3.3.1 Connect the watch from cellphone
Enter cellphone settings-BT settings-open BT.Click on the search equipment and click
selection and pairing when the smart cellphone watch device is found, then also choose
“Yes”on the watch, the pairing is successful. (Note: it should be confirmed whether the
device can be searched).When there is “Directory” request, please click on“OK” and had
better choose “Don't Remind Next Time” at the same time to facilitate the
synchronization of directory when it is connected next time without reminding you
again.
3.3.2 Connect the cellphone from the smart watch
Select cellphone settings-BT settings-open BT on the smart watch, and then enter the BT
dialer module from the main menu, click on the search device to find your smart
cellphone (e.g. Sumsung9500)--choose “pairing”; the following procedures are the same
to 3.3.1;
Note: At that moment the BT of cellphone should be opened and is allowed to be
searched by surrounding BT products.
3.4 Description of function menu
Dial : Single click on the dial key to enter the dialing interface.
There are various ways of dialing voice call : direct dial, directory dial, and talk record
dial.
Direct dial: Input the phone number direclty that you want to call, and then press the
dial key to dial.
Directory dial: Switch from dialing interface to the contact interface, choose the
phone number you want to dial, and press the icon of dialing.
Call record dialing: Switch from the dial interface to the call record interface and
click on the icon of dialing after choosing one call record.
Telephone answering: