User Manual

15
ENGLISHSWAGTRON EB-7 16" Electric Bike
Local regulations and laws pertaining to the recycling and disposal of lithium-ion batteries and/or products containing them will
vary according to country, state, and local governments. You must check laws and regulations corresponding to where you live in
order to properly dispose of the battery and/or unit. It is the user’s responsibility to dispose of their waste equipment properly with
accordance with local regulations and laws.
For additional information about where you should drop off your batteries and electrical or electronic waste, please contact your
local or regional waste-management ofce, your household waste disposal service, or your point-of-sale.
Section 6. Maintenance
• Do not perform any kind of maintenance while the eBike is charging.
• Attempting to repair or modify your eBike can void all warranties. Only authorized repair centers may service the eBike.
If you need assistance, please contact customer service.
6.1 Tire Ination
You will need a pressure gauge, a standard bicycle pump to inate the EB-7 eBike’s tires.
Step 1. Ensure the eBike is powered off and stable, so it doesn’t move during ination.
Step 2. Visually inspect the tires for damage, scuff, or puncture marks. If the tire is damaged, DO NOT INFLATE IT. Contact
customer service immediately.
Step 3. Find the valve located on the inside of the wheel and remove the cap.
Step 4. Use a standard bicycle pump to pump air to the tires slowly.
Step 5. Use the pressure gauge periodically to check PSI.
Step 6. When the tire reaches 40-65 PSI/2.8-4.5BAR, stop inating and replace the valve cap.
Step 7. Repeat with other tire.