4-UP QUICK START GUIDE SAVE THIS GUIDE FOR FUTURE USE www.SWAGTRON.
Thank you for your purchase of the 4-UP by SWAGTRON™! You’re about to take the next step in the evolution of VR. The 4-UP takes the fun of drone racing, the visuals of a VR headset, and tops it off with an extra bit of swag. To ensure your safety and the safety of others, please read and follow the guidelines in this User Manual carefully and thoroughly before using your 4-UP. If you have any questions regarding the SWAGTRON™, contact us at 1-844-299-0625 for further assistance.
Table of Contents 1.0 Specifications ������������������������������������������������������������������������������ 5 2.0 Main Features ����������������������������������������������������������������������������� 5 3.0 Safety Tips ��������������������������������������������������������������������������������� 5 5.0 Product Overview ������������������������������������������������������������������������� 6 6.
1.0 Specifications Image Resolution: Pixel Size: LCD Size: Working Voltage: Built-in Battery: Work Time: Size: Weight: Working Temperature: Storage Temperature: Actine Array 3 x 800 x 480 pixels 45umx135um/color dots pitch 5.0” (diagonal) DC 5V 7.4V 1200mAh LiPo Over 120 minutes 184 (L) x 149 (W) x 144 (H) mm 528g 32°F ~ 113°F -4°F ~ 158°F 2.0 Main Features ++ Built-in 5.
4.0 Box Contents Swagdrone 4-UP Racing Quadcopter Goggle 5.8G Antenna A 5V Power Cable Charger 5.8G Antenna B User Manual 4-UP QUICK START GUIDE SAVE THIS GUIDE FOR FUTURE USE www.SWAGTRON.com 5.0 Product Overview 1. 5.8G Antenna A 2. 5.8G Antenna B 3. Receiver Module Switch 4. AV Output Port 5. 5V Input Port 6 6. Composite Function Keys (Band Selection / Brightness, Chroma, Contrast Adjustment / Language Selection / Reset) 7.
8. Charging Indicator Light (Red, Green) 9. Power Switch 10. 5V Outpu Port 11. Charger Socket 12. AV Input Port 6.0 Charging Instructions * If the 4-UP has a low voltage, it must be recharged. 1. Plug the Charger into a suitable wall outlet (100~240V 50/60Hz). 2. Insert the Charger plug (DC 9V~18V) into the 4-UP’s Charger Socket.
Charger Socket Red LED (Lights up during charging) Green LED (LIght up when charging is complete) * Do not charge in or expose the 4-UP to environments that are subject to extreme temperature fluctuations. 7.0 Setting Up the Goggles 1. Install both 5.8G Antennas on top of the 4-UP. 2. Plug the 5V Power Cable into 5V Output Port and 5V Input Port. 5.8G Antenna A 5.
8.0 Band & Channel Table This equipment comes with 5 bands and 40 channels for option. Please select and use the channel according to your usage needs. 9.0 Receiving 5.8 Transmission * Images can be received only when the 5.8G receiving channel is consistent with 5.8G transmitting channel. * Refer to Section 8 to check 5.8G receiving channel info. * When the 4-UP’s screen flashes “Batt: 7.2V”, recharge it. 1. Use the Power Switch to turn the 4-UP on. 2.
.0 Brightness, Chroma, & Contrast Adjustment To adjust these settings, move the CF Key in different directions. Brightness, Chroma, & Contrast: Open the menu by moving the key back; see the blue arrow in the adjacent image. Move the key up or down to make a selection; see the green and black arrows in the adjacent image. Language Selection: Open the menu by moving the key back; see the blue arrow in the adjacent image.
AV Output: Sending the 4-UP’s signal to external devices will require AV output. Use an AV cable to connect the 4-UP and an external device via the AV Output Port. AV Cable AV Output Port * AV cables not included. 12.0 Troubleshooting No image on the display 1. Check to ensure the 4-UP is receiving power and the receiving module has been turned on. 2. Ensure that the 4-UP’s receiving channel is consistent with the transmitter’s channel. 3. Ensure the transmitter (if using one) has adequate power. 4.
13.0 Warnings & Information It is important that you follow all instructions and regard all notes that appear throughout this manual. 13.1 Safety Warnings ++ Always remove the battery to turn the product off before transporting or storing. ++ Store the product indoors at a dry and stable temperature. Do not store in an unheated garage, shed, or other location with extreme temperature fluctuations.
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Modification or changes to this equipment not expressly approved by Radio Systems Corporation may void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
item becomes SWAGTRON™’s property. This warranty only covers technical hardware defectiveness during the warranty period and under normal use conditions. SWAGTRON™ does not warrant uninterrupted or error-free operation of this Product.
SWAGTRONTM SwagdroneTM 4-UP Racing Quadcotper Goggle Quick Start Guide