User Manual

Display Indicators & Modes

Different screens and their related settings may be shown on the display as desired.

To switch between screens and display different information, briefly press the

POWER button.

1. RPM: This icon displays revolutions per minute.

2. Voltage: This icon displays upon start-up. The voltage is related to internal

settings within the scooter and is not user-accessible.

3. Odometer: When this mode is selected, the odometer icon and the

corresponding value will appear on the highlighted area on the display.

4. Trip Meter: When this mode is selected, the distance icon and the corresponding

value will appear on the highlighted area on the display. This icon tracks your travel

distance per trip. Turn off the scooter to reset or press and hold the UP button.

5. Time: When this mode is selected, the time icon and the corresponding value will appear on the highlighted area on the

display. This icon is related to tracking the travel time per trip. To reset, turn the scooter off.

2.5 Program Menu

The display also features five program settings which are not readily indicated on the screen by default. Follow the steps to

access the settings screen and make changes.

Step 1. Press and hold the UP and DOWN buttons simultaneously for ~2 seconds.

Step 2. Press the POWER button to cycle through the 6 program options (see

below).

Step 3. For each setting, press UP or DOWN buttons adjust the option.

Step 4. Press the POWER button to confirm changes and cycle to the next screen.

Step 5. Press and hold the UP and DOWN buttons simultaneously for ~2 seconds to

exit settings.

The display will timeout after a few seconds of inactivity and return to the main display

interface.