User Manual

SWAGTRON SWAGGER 8 USER MANUAL 09
01: Adjusting Brightness of Display’s Backlight
Press UP and DOWN buttons to adjust the brightness of the display’s backlight.
02: Measurement Setting
Change the current speed measurement in this setting. Speed may be displayed in either miles per hour (MPH) or kilometers
per hour (KM/H). Option 0 is KM/H. Option 1 is MPH. By default, this option is set to 1. If changed, the display will show the
related icons.
03: Shutoff Time
Set the time, between 0 and 60 minutes, that the scooter will power down after inactivity.
04: Manual Kick-Start Motor
Options can be set to 0 (off) or 1 (on). By default, this option is off. Selecting 1 turns on this feature. When activated, the
throttle can not be used until you reach 1.8 mph manually. If you drop below the trigger threshold, the throttle cannot engage
again until you reach 1.8 mph. For details on the different ways to accelerate, please see Section 5.1.
This feature will remain active until you turn it off from the Program Menu, even if you turn off the scooter.
05: Cruise Control
Options can be set to 1 (off) or 2 (on). By default, this option is off. Selecting 2 turns the feature on.
This feature will remain active until you turn it off from the Program Menu, even if you turn off the scooter.
06: Clear Odometer (ODO) Data
Press and hold the UP button until the settings icon disappears. All mileage will be deleted and the display will automatically
power off.