User Manual

ENGLISH SWAGTRON EB-12 24" Electric Bike

Section 6. Maintenance

• Do not perform any kind of maintenance while the eBike is charging.

• Attempting to repair or modify your eBike can void all warranties. Only authorized repair centers may service the eBike.

If you need assistance, please contact customer service.

6.1 Tire Ination

You will need a pressure gauge and a standard bicycle pump to inate the EB-12 eBike’s tires.

Step 1. Ensure the eBike is powered off and stable, so it doesn’t move during ination.

Step 2. Visually inspect the tires for damage, scuff, or puncture marks. If the tire is damaged, DO NOT INFLATE IT. Contact

customer service immediately.

Step 3. Find the valve located on the inside of the wheel and remove the cap.

Step 4. Use a standard bicycle pump to pump air to the tires slowly.

Step 5. Use the pressure gauge periodically to check PSI.

Step 6. When the tire reaches 100 PSI / 7.0 BAR, stop inating and replace the valve cap.

Step 7. Repeat with other tire.

•AnyPSImarkingonthetiresindicatesamaximum.DONOTinatethefronttiretothisvalue,onlyinateitto100PSIas

directed above.

•Underinationisstronglyrecommendedifyouintendtorideoutdoorsintemperaturesabove90°Fdegrees.Bringthe

EB-12 eBike indoors and deate the tires to 90 PSI. If the PSI is too high and the tire are exposed to excessively high

temperatures, riding outdoors may cause serious damage to the tire including but not limited to stretching and/or

rupturing.