Use and Care Manual

• Read all instructions carefully and keep them for future reference.

• Remove all packaging.

• The filter has been installed in the spout of the Kettle during production. If it has been dislodged dur-

ing shipping check inside the Kettle or in the box. Install the Filter before using the Kettle.

IMPORTANT NOTES:

1. DO NOT remove or install the filter when the Kettle is hot.

2. DO NOT use the kettle without the filter in position:

- This may allow water to spit out when boiling

- The kettle may remain in the boil cycle too long once the water has boiled

- The kettle may not shut off

3. Fill the Kettle with 4 cups (1L) of cold tap water and bring to a boil. Add 2 cups (500 ml) of white

vinegar and let stand for at least 1 hour or overnight. Discard.

4. Fill the kettle to the maximum fill line with cold tap water. Bring to a boil and discard. Repeat.

5. The kettle is now ready to use.

BEFORE FIRST USE

SK34020_CAN_IM.indd 4 10/07/2017 17:13