SDS

MATERIAL SAFETY DATA SHEET
PREMIER BUILDING SOLUTIONS, INC.
Page 6 of 10
Version: 1.3
Revision Date 01/07/2014
XTRABOND 250 100% RTV ACETOXY SILICONE SEALANT
6
pH: Not determined.
Volatile Content: Not determined.
Flash Point: > 212 °F / > 100 °C (Closed Cup)
Autoignition Temperature: Not determined.
Flammability Limits in Air: Not determined.
VOLATILE ORGANIC COMPOUNDS (VOC): Product complies with State and Federal
regulations for VOC content.
Note: The above information is not intended for use in preparing product specifications.
10. STABILITY AND REACTITY
Chemical Stability: Stable.
Hazardous Polymerization: Hazardous polymerization will not occur.
Conditions to Avoid: None.
Materials to Avoid: Oxidizing material can cause a reaction. Water, moisture, or humid air can cause hazardous
vapors to form as described in Section 8.
Hazardous Decomposition Products
Thermal breakdown of this product during fire or very high heat conditions may evolve the following decomposition products:
Carbon oxides and traces of incompletely burned carbon compounds. Silicon dioxide. Formaldehyde. Metal oxides. Sulfur
oxides. Nitrogen oxides. Chlorine compounds.
11. TOXICOLOGICAL INFORMATION
Special Hazard Information on Components
No known applicable information.
12. ECOLOGICAL CONSIDERATIONS
Environmental Fate and Distribution
Complete information is not yet available.
Environmental Effects
Complete information is not yet available.
Fate and Effects in Waste Water Treatment Plants