Operating Guide

The Swan Corporation ❚ One City Centre Ste. 2300 ❚ St. Louis, MO 63101 ❚ p [phone] ❚ f [phone] ❚ www.swanstone.com
56
BT-3060 L/R Veritek
®
Bathtub
SWANSTONE BATHTUBS
WARRANTY
Limited Lifetime – Residential
Limited 5-year – Commercial
Manufactured from Swanstone Veritek
®
(see page 2 for detailed information)
M A I N T E N A N C E A N D
C L E A N I N G I N F O R M AT I O N
This product is made of Veritek, a Natural
Gloss Composite. Finish is stain resistant;
however, the finish requires reasonable
care. Wash regularly with warm water, use
a soft cloth with mild liquid detergent
such as Top Job, Ajax Liquid Cleaner, or
Mr. Clean All-Purpose Cleaner. Remove
hard water stains or mineral build-up
with scale removers such as Lime-Away.
Never use abrasive scouring powders,
cleaners or pads. They will dull the finish.
Protect finish with any fiberglass wax or
automotive paste wax.
• White (010)
• Bone (037)
• Bisque (018)
• Bermuda Sand (040)
• Gray Granite (042)
• Tahiti Desert (050)
C O L O R S
(See pg. 139 for color sample.)
S P E C I F I C AT I O N S
BT-3060 L/R Veritek
®
Bathtub
Tub Area Ship Ship Carton
Model Part Designed To Fit Wt. Lb. UPS Dims. In. Cu. Ft.
BT-3060 L/R BT03060 L/R 30" W x 60" D 70 – 62 x 33 x 19 22.16
(762 mm x 1524 mm)
Kit Includes: One bathtub, six bathtub clips and complete installation
instructions.
Available in 5-packs BT 3060L5 and BT3060R5.
Packaging: Each kit is packed in a flat, rectangular carton.
S TA N D A R D S A N D R AT I N G S
Class B fire rating
American National Standard Institute—ANSI Z124.1.2
International Association of Plumbing and Mechanical Officials (IAPMO)—listed
cUPC listed—Certified to CSA Standard B45 by IAPMO
American Society for Testing and Materials
National Electrical Manufacturers Association
F E AT U R E S
• The BT-3060 L/R is a compression
molded material with molded-in color
and a natural gloss surface for easy
cleaning
• Solid and granite colors match many
Swanstone and Veritek wall systems
• Generous 16" height is deeper than
a standard tub
• Pre-leveled bottom for easy installation
• Skid-resistant pattern molded into
bathtub
• Made of Veritek with no surface
coating to chip or crack—color runs
throughout
BT-3060 L/R Veritek
®
Bathtub
Designed to fit tub area
30" deep x 60" wide (762 mm x 1524 mm)
Capacity: 65 gallons to bottom of overflow
13-1/2" from bottom of tub to center line of overflow
Bathing well dimensions: 22-1/2" x 50" x 13" (572 mm x 1270 mm x 330 mm)
58"
S U P P O R T D O C U M E N T S
Installation instructions available on line at www.swanstone.com
60"
30"
16"
1-1/2"