Installation Guide

4. Place silicone on the back side of the apron strips.

5. Attach the apron strips to the wall.

Temporary Bracing

Install temporary bracing to hold the three panels in

place until the silicone is completely set (usually

24 hours). This will allow proper curing of the silicone.

To ensure contact between the panels and walls until the

silicone sets, install temporary bracing after completing

installation. The bracing should be constructed from

lengths of 2 x 4’s. Failure to brace in the manner

described could keep the panels from adhering, resulting

in personal injury, as well as water damage or other

damage to floors, walls, or other portions of your building

or home.

To prevent scratches or other damage, make sure there

are no nails or other foreign objects in the surface of the

bracing that is placed against the panel.

If the horizontal braces are fastened to the vertical braces

using nails or screws, make sure the fasteners do not

penetrate the surface of the panel. Also, to prevent

possible damage to the walls, do not apply excessive

pressure to the braces.

IMPORTANT NOTICE

The Swan Corporation – Swanstone 16 800-325-7008

Installation Procedure