Dimensions Guide

Swan • St. Louis, MO 63101 • [phone] • swanstone.com86
Model A B C D
SS-3232 32" 32" 16" 16"
SS-3248 48" 32" 24" 16"
SS-3260 60" 32" 30" 16"
SS-3442 42" 34" 21" 17"
SS-3448 48" 34" 24" 17"
Single Threshold Shower Floors
With Fit-Flo™ Drain
SWANSTONE SHOWER FLOORS
WARRANTY
Limited Lifetime – Residential
Limited 10-year – Commercial
Manufactured from Swanstone solid surface
(See page 2 for detailed information.)
SPECIFICATIONS
Single Threshold Shower Floors With Fit-Flo
™
Drain
(See next page for more models.)
Ship Ship Carton
Model Part Nominal Size Dimensions Wt. Lb. FedEx Dims. In. Cu. Ft.
SS-3232 SF03232MD 32" D x 32" W (813 mm x 813 mm) 32 – 38 x 37 x 10 9
SS-3248 SF03248MD 32" D x 48" W (813 mm x 1219 mm) 49 – 54 x 38 x 10 12
SS-3260* SF03260MD 32" D x 60" W (813 mm x 1524 mm) 56 – 66 x 37 x 10 15
SS-3442 SF03442MD 34" D x 42" W (864 mm x 1067 mm) 47 – 48 x 40 x 10 12
SS-3448 SF03448MD 34" D x 48" W (864 mm x 1219 mm) 47 – 54 x 39 x 10 13
*Center drain
Includes: One code-approved compression-molded Swanstone floor with
molded-in Fit-Flo drain and installation instructions.
Packaging: Each floor packed in a rectangular carton.
MAINTENANCE AND
CLEANING INFORMATION
Clean regularly with common household liquid
cleaners and a sponge or soft cloth. For hard
water stains, scale removers can be used. If
necessary, abrasive cleaners can be used with
a nylon brush or pad to remove build up on
the shower floor surface. Do not use a metal-
scouring pad or a wire brush, as it will damage
the surface. Do not use “leave on” cleaning
products, such as automatic spray shower
cleaners. Prolonged contact with harsh chemicals
could have an adverse reaction over time and
discolor surfaces. Do not use cleaning agents
that caution use on acrylic, polyester or plastics.
Nominal Rough-In Dimensions
Model Size A B C D
SS-3232 32" x 32" 32-3/8" 32-3/16" 16-3/16" 16-3/16"
SS-3248 32" x 48" 48-3/8" 32-3/16" 24-3/16" 16-3/16"
SS-3260 32" x 60" 60-3/8" 32-3/16" 30-3/16" 16-3/16"
SS-3442 34" x 42" 42-3/8" 34-3/16" 21-3/16" 17-3/16"
SS-3448 34" x 48" 48-3/8" 34-3/16" 24-3/16" 17-3/16"
FEATURES
• Reinforced solid surface means color and texture run all
the way through and cannot wear away.
• Will not mold or mildew, no grout to clean.
• Coordinates with Swanstone shower and bath systems.
• Pebbled, slip-resistant surface.
Recommended for high-use traffic areas and commercial surfaces.
IMPORTANT: Rough-in dimensions are provided for reference only.
You must measure the actual shower floor and check local building code
requirements before construction of the stud wall.
COLORS
(See inside back cover for color sample.)
SUPPORT DOCUMENTS
Installation instructions available at swanstone.com.
STANDARDS AND RATINGS
American National Standard Institute—ANSI Z124.1.2
International Association of Plumbing and Mechanical Officials (IAPMO)—Listed
CSA Standard B45.5 by IAPMO
Uniform Plumbing Code (UPC)
For a complete list of tests and results see the Technical Data Sheet – page 175.
Solid Colors:
• White (010)
• Bone (037)
• Bisque (018)
• Bright White (137)
• Pearl (138)
Aggregate Colors:
• Acorn (123)
• Almond Galaxy (046)
• Arctic Granite (035)
• Baby’s Breath (168)
• Barley (091)
• Bermuda Sand (040)
• Canyon (124)
• Caraway Seed (169)
• Cloud Bone (126)
• Cloud White (125)
• Cornflower (063)
• Glacier (121)
• Golden Steppe (128)
• Gray Granite (042)
• Ice (130)
• Indian Grass (071)
• Mountain Haze (129)
• Night Sky (012)
• Pebble (072)
• Prairie (122)
• Sierra (094)
• Tahiti Desert (050)
• Tahiti Gray (053)
• Tahiti Ivory (059)
• Tahiti Matrix (058)
• Tahiti Sand (051)
• Tahiti Terra (055)
• Tahiti White (011)
• Tundra (131)
• Winter Wheat (060)