MSDS

MATERIAL SAFETY DATA SHEET
PREMIER INDUSTRIAL SUPPLY, INC.
Page 5 of 8
Version: 1.1
Revision Date: March 3, 2011
XTRABOND XB250 ACETOXY CURE SILICONE SEALANT
5
Note: These precautions are for room temperature handling. Use at elevated temperature or aerosol/spray applications may require added precautions.
9. PHYSICAL & CHEMICAL PROPERTIES
Physical Form: Paste
Color: See product name
Odor: Acetic acid odor
Specific Gravity @ 25°C: 1.007
Viscosity: Not determined.
Freezing/Melting Point: Not determined.
Boiling Point: Not determined.
Vapor Pressure @ 25°C: Not determined.
Vapor Density: Not determined.
Solubility in Water: Not determined.
pH: Not determined.
Volatile Content: Not determined.
Flash Point: > 212 °F / > 100 °C (Closed Cup)
Autoignition Temperature: Not determined.
Flammability Limits in Air: Not determined.
Note: The above information is not intended for use in preparing product specifications.
10. STABILITY AND REACTITY
Chemical Stability: Stable.
Hazardous Polymerization: Hazardous polymerization will not occur.
Conditions to Avoid: None.
Materials to Avoid: Oxidizing material can cause a reaction. Water, moisture, or humid air can cause hazardous
vapors to form as described in Section 8.
Hazardous Decomposition Products
Thermal breakdown of this product during fire or very high heat conditions may evolve the following decomposition products:
Carbon oxides and traces of incompletely burned carbon compounds. Silicon dioxide. Formaldehyde. Metal oxides. Sulfur
oxides. Nitrogen oxides. Chlorine compounds.
11. TOXICOLOGICAL INFORMATION
Special Hazard Information on Components
No known applicable information.
12. ECOLOGICAL CONSIDERATIONS
Environmental Fate and Distribution