SDS

SAFETY DATA SHEET
PREMIER BUILDING SOLUTIONS, INC.
Page 3 of 21
Version: 1.2
Revision Date: 12/5/2016
XTRABOND 250 100% RTV SILICONE SEALANT
3
Specific Extinguishing Methods
Use extinguishing measures that are appropriate to local circumstances and the surrounding
environment. Use water spray to cool unopened containers. Remove undamaged containers
from fire area if it is safe to do so. Evacuate area.
Special Protective Equipment for firefighters
Wear self-contained breathing apparatus for firefighting if necessary. Use personal protective
equipment.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Follow safe handling advice and personal protective equipment recommendations.
Environmental Precautions
Discharge into the environment must be avoided. Prevent further leakage or spillage if safe to
do so. Retain and dispose of contaminated wash water. Local authorities should be advised if
significant spillages cannot be contained.
Methods and material for containment and cleaning up
Soak up with inert absorbent material. For large spills, provide diking or other appropriate
containment to keep material from spreading. If diked material can be pumped, store recovered
material in appropriate container. Clean up remaining materials from spill with suitable
absorbent. Local or national regulations may apply to releases and disposal of this material, as
well as those materials and items employed in the cleanup of releases. You will need to
determine which regulations are applicable. Sections 13 and 15 of this SDS provide information
regarding certain local or national requirements.
7. HANDLING AND STORAGE
Precautions for safe handling
Technical Measures
See Engineering measures under EXPOSURE CONTROLS/PERSONAL PROTECTION
section.
Local/Total Ventilation
Use only with adequate ventilation
Advice on safe handling