Steam Generator Model: SI11010N Helpline 0871 200 0003 SI11010N_IM.indd 1 v1.
IMPORTANT INFORMATION - RETAIN FOR FUTURE USE When using any electrical appliance, basic safety precautions should always be followed including the following: • Always ensure that the voltage on the rating label corresponds to the mains voltage in your home Incorrect operation and improper use can damage the appliance and cause injury to the user.
IMPORTANT INFORMATION - RETAIN FOR FUTURE USE • • • • • • • • • • Do not carry the appliance by the power cord. Do not leave the appliance unattended during use. Always unplug the unit when not in use or before cleaning. Always operate the appliance on a smooth, even, stable surface. Do not place the unit on a hot surface. Ensure that the unit is switched off after use.
PARTS 1. Water tank 2. Handle 3. Soleplate 4. Steam release button 5. Temperature control dial 6. Power cord/supply hose 7. Power cord 8. Handle release button 9. Filter 10. Water tank lock Removing tank 4 SI11010N_IM.
GETTING STARTED A QUICK WORD ABOUT LIMESCALE Modern Steam Irons (like this one) give a much higher steam output than their counterparts from the 80s and 90s. That makes ironing a lot easier! However, to get this high performance, modern Steam Irons use high precision components inside. These can be ruined by excessive limescale build up. Depending on where you live, limescale can have a major impact on the operational life and efficiency of steam irons.
GETTING STARTED PRIMING THE PUMP OK so your Steam Generator Iron is now switched on and heating up nicely. When the indicator light on the hand unit goes out, it has reached temperature. 1. Lift the iron from the base 2. Hold it lower than the base (on first time use like this, gravity helps to get water to the hand unit more quickly) 3. Press and HOLD the steam release button for up to 30 seconds 4. The pump will make a vibration noise that will become quieter as it becomes primed with water. 5.
IRONING TIPS DRY IRONING If the garment requires dry ironing then don’t press the steam release button during ironing. There are some lower temperature settings eg NYLON where steam function is not available, since the soleplate doesn’t get hot enough to produce steam at his temperature If you are unsure about the correct setting for your iron or if the garment label is missing then try ironing a small inconspicuous area of the garment first.
AFTER USE When you have finished ironing: • • • • • • • Unplug the product from the mains supply and allow to fully cool. If you are using tap water then remove the tank and empty the water out, then repfit the tank.
DOCUMENTATION We Swan Products Ltd declare that this product conforms to the following product legislation in accordance with the following directive(s): 2004/108/EC The EMC Directive (the Electromagnetic Compatibility Directive). 2006/95EC. The LVD Directive (Low Voltage Directive). 2011-65-EU. The RoHS directive (Restriction of Hazardous Substances Directive) WARRANTY This product is guaranteed for 2 years from the date of original purchase.
DISPOSAL OF UNIT Appliances bearing the symbol shown here may not be disposed of in domestic rubbish. You are required to dispose of old electrical and electronic appliances like this separately. Please visit www.recycle-more.co.uk or www.recyclenow.co.uk for access to information about the recycling of electrical items. Please visit www.weeeireland.ie for access to information about the recycling of electrical items purchased in Ireland.
NOTES Affix your store receipt to this page 11 SI11010N_IM.
www.swan-brand.co.uk Est.1931 Scan this QR code to hear about our story We love what we do 2 year* sGUARANTEE we’re proud of our quality Find us on Facebook * on selected products Copyright © Swan Products Ltd. PO Box 3117, Stoke-on-Trent ST4 9GD SI11010N_IM.