Operation Manual

3
IMPORTANT INFORMATION - RETAIN FOR FUTURE USE
• Do not carry the appliance by the power cord.
• Do not leave the appliance unattended during use. Always unplug the unit when
not in use or before cleaning.
• Always operate the appliance on a smooth, even, stable surface. Do not place the
unit on a hot surface.
• Ensure that the unit is switched off after use.
• The manufacturer does not accept responsibility for any damage or injury
caused by improper or incorrect use, or for repairs carried out by unauthorised
personnel.
• In case of technical problems, switch off the product and do not attempt to repair
it yourself. Return the appliance to an authorised service facility for examination,
adjustment or repair. Always insist on the use of original spare parts. Failure to
comply with the above mentions precautions and instructions, could affect the
safe operation of this product.
• Your appliance must never be switched on through an external timer or any kind
of separate remote control system
• The water inlet must be closed during use
• Do not open the safety valve while using the appliance or before the water is
completely used up (when the iron stops producing steam indicates that the
tank is empty). To add water, unplug and wait 15 minutes to avoid sudden
temperature changes. Place a cloth over the safety valve and unscrew slowly to
allow any remaining steam/pressure to escape slowly
• Only place the unit complete with base on a stand that is designed to withstand
the weight. Some lightweight ironing boards may be unsuitable. In this case,
place on separate counter top.
Description: Steam Generator
Model: SI110100N
Input Voltage: 230V ~
Frequency: 50/60Hz
Power consumption: 2200 Watts
TECHNICAL DATA
CAUTION: SURFACES BECOME HOT DURING USE
SI11010N_IM.indd 3 01/05/2014 11:34