manual

USING YOUR STEAM IRON
Before first use
1. Remove any stickers, protective foil or storage cover from the soleplate.
2. Heat up the iron to maximum temperature and iron over a piece of
damp cloth for several minutes for the purpose of removing any residue on
the soleplate.
Note: It is normal for a strange odour to come from the unit during the first
use. This is due to light oils used to preserve components during
manufacture. The odour will disappear after first use.
Operation
1. Press the tank release button (11) and remove the tank. Add clean
water into the water tank to the MAX level. Replace the tank,
ensuring that it “clicks” into place. For best results and longer
product life, use bottled or purified water – especially if you live in a
hard water area. Make sure not to exceed Max level on the tank.
2. Press down filler cap (3) of water tank and you will hear a click if it
is in the correct position.
3. Connect plug to outlet and turn temperature dial to your desired
setting, which is determined by the type of fabric you intend to iron.
The indicator light will illuminate.
4. Make sure steam dial is on dry position then place the iron
vertically
5. Once soleplate temperature has reached the preset temperature,
indicator light will turn off, then set steam dial (3) to your desired
steam output or dry position and begin ironing. WARNING: Not
touch hot soleplate at any time during ironing. It will be very hot.
6. Press spray water button a couple of times to moisten the laundry
if necessary, before spraying make sure that there is enough water
in water tank.
7. Steam shot function is best used at max temperature, as it helps