manual

remove stubborn creases.
8. The iron has an anti-drip function: if you are ironing dense
garments for a long time, the soleplate temperature can drop. To
prevent water coming from the soleplate, the iron will automatically
reduce the steam output.
9.
“Steam shot” can also be applied when holding the iron in a
vertical position, so this is useful for removing creases from hung
clothes, curtains, etc.
IRONING TIPS
 Always check first whether a label with ironing instructions is
attached to the article.
 The iron heats up quicker than it cools down, therefore, you should
start ironing the articles requiring the lowest temperature such as
those made of synthetic fibres.
 If the fabric consists of various kinds of fibres, you must always
select the lowest ironing temperature to iron the composition of
those fibres.
 Silk and other fabrics that are likely to become shiny should be
ironed on the inner side. To prevent staining do not spray water
straight on silk or other delicate fabrics.
 Velvet and other textures that rapidly become shiny should be
ironed in one direction with light pressure applied. Always keep the
iron moving at any given moment.
 Pure woollen fabrics (100% wool) may be ironed with the iron set a
steam position. Preferably set steam button to the maximum
position and use a dry cloth as a mat.
 Note: when ironing woolen fabrics, shining of the fabric may occur.
So it is suggested that you should turn the article inside out and
iron the reverse side.