manual

CLEANING AND MAINTENANCE
After ironing
1. Disconnect power supply and empty the water left in water tank.
2. Reconnect into power supply and disconnect after indicator light
goes off, this dries the soleplate.
3. Let the iron completely cool down, then wipe flakes and any other
deposits on the soleplate with a damp cloth or a non-abrasive
(liquid) cleaner.
4. Clean the upper part of iron with a damp cloth.
5. Always store the emptied iron horizontally on a stable surface with
a cloth protecting the soleplate.
Self-clean function
Clean the unit regularly – more so if you live in a hard water area.
1. Fill water into the water tank and set the temperature selector to
Max position
2.
Connect into power supply and indicator light will be illuminated,
make sure Steam control button (4) is in the self clean position
Warning: never pour white vinegar or other liquid cleaners for
eliminating calcium into water tank!
3. Hold the iron over the sink and press the button while the steam
control is in the self-clean position. Steam and boiling water will
come out of the soleplate along with any impurities and limescale
flakes.
Auto-decalcification feature
There is a decalcification unit inside the appliance, which can absorb
insoluble calcium ions and send out soluble natrium ion so that water can
be softened, and the process of calcium deposits building up is greatly
reduced. This is an automatic process and not controlable by the user.