Important safeguards 1. Make sure to read all the safety precautions below and look at the illustrations before you start using the appliance. 2. Use the appliance for its intended use only. 3. The appliance is intended for household use only. 4. In order to protect against the risk of electric shock, do not immerse iron、power base into water or any other liquids 5. Connect the appliance only to an alternating current of the voltage specified on the rating plate and only to an earthed socket.
Parts and Features 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Water tank Handle Soleplate Heating indicator light Steam button Steam button lock Steam button Temperature control dial Power cord/Supply hose Power cord Handle Button Heating indicator light (Power base) 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25.
Fabric Setting Chart WOOL SILK COTTON Temperature Setting SYNTHETIC Fabric Synthetics, Silk, Nylon, Arcrylic, Acetate Wool, Polyester Rayon cotton, Linen Dry Iron on the opposite side of the fabric Use a press cloth and Steam Iron on the opposite side of the fabric Iron while fabric is still damp Ironing Instruction Linen Max Steam Selection Temperature control dial 4 Rayon cotton, Linen Steam Ironing
Ironing Temperature Setting Guide 1. Follow up the ironing instructions on the garment label. If there is not any instruction label, but you know what the fabric is, please refer to the fabric setting chart described in this instruction manual. 2. The fabric setting chart is only valid for plain fabrics and not for materials to which finishes, glosses etc, have been applied. Textile to which some kind of finish has been applied (gloss, crinkle, relief etc.) is best ironed at lower temperature. 3.
How to use your steam generator Prepare the appliance for use: 1. Check if the rating indicated in the rating plate corresponding to the main voltage in your home 2. Press handle buttons to lay handle down. Fig.1 (Note: When handle is up, the unit is shut off, it will be ON when handle is laid down.) 3. Remove any protective foil or sticker or card from the soleplate. Fig.1 4. Fully unwind and straighten the power cord and the supply hose. 5.
How to use your steam generator Functions for Water tank indicator light 1. After power On, water tank indicator light will light up. Water tank indicator light blinks to show that no water or not enough water is in the tank, please fill water to Max level. After filling with water, water tank indicator light will light up steadily for easy viewing of water level. 2.
How to use your steam generator 5. During steam ironing, please adjust steam rate according to your requirement as indicated in the steam function setting. 6. After use, Set the temperature control dial to “MIN” position, and place the iron back on the iron rest plate. Switch off the unit by pressing the power switch and then unplug the appliance from the outlet. 7. Slide out the water tank and pour out the remaining water. Note: a.
How to use your steam generator Vertical steam ironing Follow the steam ironing process, and then hold the iron in vertical position between 5cm and 15cm away from the hanged fabrics. (Fig.6) Press the steam button, and then will create vertical steam. This feature is especially used for removing creases from hanging clothes and curtains. Never steam garments whilst wearing them! Note: 1. During steam ironing, supply hose is very hot, please do not touch it. 2. Never block the steam hose. Fig.
How to use your steam generator Filter Replacement 1. A filter checking system is built into this appliance. It can detect the working time for the filter. Once the filter is invalid ,the filter replacement indicator light on control panel will continuously blink to indicate that the filter needs to be replaced (Fig.8) . 2. Replacement Method: Slide water tank out from base unit (Fig.9), take the filter out from water tank (Fig.10), and then replace with a new one. (Fig.
Anti-calc system 1. The filter is designed to reduce the build-up of limescale which occurs during steam ironing, this will prolong the working life of your iron. However, please note that the filter will not completely stop the natural process of limescales build-up. 2. After the filter is invalid, even if a new one is not available at that time. The filter can still be used continuously. However, limescales may be most probably built up in steam chamber, This happens depending on your local water quality.
Use of the handle Handle attached to the base unit used for carrying the appliance, it also serves as a power on/off switch: Lift the handle up to power OFF. Lay it down for power ON. Before use, please lay the handle down as following method: Press two handle buttons at the same time to lay down the handle (Fig.14). After use, allow the appliance completely cool down (Fig.15), put the iron onto power base. Lift handle up.
Trouble shooting Problems Iron won’t heat Water tank light blinks. Two BEEP sounds alarm when pressing the steam button. Droplets of water escape from the soleplate Water tank decoration indicator light OFF All indicator light OFF Iron does not produce steam Possible causes Solution Incorrect connection to the main socket Re-plug the unit to main socket. Temperature setting knob is set at O position. Set to the required position.