Instruction manual

1. Check if the rating indicated in the rating plate

corresponding to the main voltage in your home

2. Press handle buttons to lay handle down. Fig.1

(Note: When handle is up, the unit is shut off, it

will be ON when handle is laid down.)

3. Remove any protective foil or sticker or card from

the soleplate.

4. Fully unwind and straighten the power cord and

the supply hose.

5. Place the appliance on a stable, level and horizontal surface such as ironing board.

6. Place the iron onto the iron rest plate horizontally at the base unit.

Prepare the appliance for use:

1. Press the water tank lock upwards and

slide the detachable water tank

outwards from the base.(Once power

on, water tank indicator light

will turn off while water tank is sliding

out.) Fig.2

2. Take the filter upwards out from the

water fill hole. (You can take the filter

out of the opening for filling water into

water tank, or fill water into water tank

directly with the filter existing in the

opening) Fig.3

3. Fill the water tank up to or below the

“MAX” fill line with clean water. Fig.4

4. Replace filter back into water filling hole.

5. Replace the water tank into the base

unit again. It will be locked in place with

the base unit when a “click” sound is

heard.(Water tank

indicator light will light up to indicate that

water tank and filter have been installed

in place. Power will then be ON) Fig.5

6. Always pour out the remaining water

after use.

Fill water tank

How to use your steam generator

Fig.1

Fig.2

Fig.3 Fig.4

Fig.5