Operation Manual

HOW TO USE YOUR MICROWAVE
BEFORE COOKING
The LED flashes 3 times when plugged in power supply. Then it
flashes “:”, prompting you to input the cooking menu and time.
TIME/WEIGHT KNOB
You can increase or decrease cooking time and weight during
operation by turning Time/Weight button
PAUSE/CANCEL
At the initial or input stage: press once to cancel input
programmes and resume initial stage. During cooking: press
once to stop oven operation, press twice to cancel cooking
programmes.
AUTO REMINDER
When your preset cooking procedure has finished, the LED
Display will show End and three beeps sound will be heard to
prompt you to take out the food. If you do not press Pause/
Cancel button once or open the door, the beep will sound at an
interval of 3 minutes.
CLOCK SETTING
Clock button allows you to input current time when “:” flashes on
LED display after unit is plugged in, or skip the time setting step
if unnecessary.
Example: to set 12:30
Steps Display
1 Power up the oven :
2 Press the Clock button once 00:00
3 Turn Temp.Time/Weight knob to set
exact hours
12:00
4 Press Clock button once again 12:00
5 Turn Temp.Time/Weight knob to set
exact minutes
12:30
6 Press Clock button once again (or wait
for 5 seconds & clock will run normally)
6
SM22090_IM.indd 6 10/03/2016 08:41