SDS

ManualsBrandsSwan ManualsPlumbingTub Wall Installation Kit in Tahiti Ivory

MATERIAL SAFETY DATA SHEET

PREMIER BUILDING SOLUTIONS, INC.

Page 1 of 10

Version: 1.3

Revision Date 01/07/2014

XTRABOND 250 100% RTV ACETOXY SILICONE SEALANT

1. CHEMICAL PRODUCT & COMPANY IDENTIFICATION

Product Brand Name: XtraBond 250 100% RTV Acetoxy Silicone Sealant

Product Use: Sealant & Adhesive

Proper DOT Shipping: Caulking & Glaziers, NOI

DOT Hazard Classification: NONE

Molecular Formula: Mixture

NFPA Profile: Health 1 Flammability 1 Instability/Reactivity 0

Note: NFPA = National Fire Protection Association

Company Contact Information Emergency Telephone Number

Premier Building Solutions, Inc. CHEMTREC: 800-424-9300 (24 hours)

480NovaDrive Telephone: 866-512-4583

Massillon,OH.44646

2. HAZARDS IDENTIFICATION

POTENTIAL HEALTH EFFECTS

Acute Effects

Eye: Direct contact may cause moderate irritation.

Skin: May cause moderate irritation.

Inhalation: Material is not likely to present an inhalation hazard at ambient conditions. However, if

material is heated or high vapor concentration is attained, central nervous system depression

may occur, which is characterized by drowsiness, dizziness, confusion or loss of coordination.

Oral: Low ingestion hazard in normal use.

Prolonged/Repeated Exposure Effects

Skin: Repeated or prolonged contact may cause defatting and drying of skin which may result in

skin irritation and dermatitis.

Inhalation: No known applicable information.

Oral: Repeated ingestion or swallowing large amounts may cause internal injury.

Summary of content (10 pages)

PAGE 1
MATERIAL SAFETY DATA SHEET PREMIER BUILDING SOLUTIONS, INC. Page 1 of 10 Version: 1.3 Revision Date 01/07/2014 XTRABOND 250 100% RTV ACETOXY SILICONE SEALANT 1.
PAGE 2
MATERIAL SAFETY DATA SHEET PREMIER BUILDING SOLUTIONS, INC. Page 2 of 10 Version: 1.3 Revision Date 01/07/2014 XTRABOND 250 100% RTV ACETOXY SILICONE SEALANT Signs and Symptoms of Overexposure No known applicable information. Medical Conditions Aggravated by Exposure No known applicable information. The above listed potential effects of overexposure are based on actual data, results of studies performed upon similar compositions, component data and/or expert review of the product.
PAGE 3
MATERIAL SAFETY DATA SHEET PREMIER BUILDING SOLUTIONS, INC. Page 3 of 10 Version: 1.3 Revision Date 01/07/2014 XTRABOND 250 100% RTV ACETOXY SILICONE SEALANT 5. FIRE FIGHTING MEASURES Flash Point: > 212 °F / > 100 °C (Closed Cup) Autoignition Temperature: Not determined. Flammability Limits in Air: Not determined. Extinguishing Media: On large fires use dry chemical, foam or water spray. On small fires use carbon dioxide (CO2), dry chemical or water spray.
PAGE 4
MATERIAL SAFETY DATA SHEET PREMIER BUILDING SOLUTIONS, INC. Page 4 of 10 Version: 1.3 Revision Date 01/07/2014 XTRABOND 250 100% RTV ACETOXY SILICONE SEALANT 8. EXPOSURE CONTROLS & PERSONAL PROTECTION Component Exposure Limits CAS Number Component Name Exposure Limits 64742-46-7 Hydrotreated middle petroleum Distillates. OSHA PEL (final rule) and ACGIH TLV for oil mists: TWA 5 mg/m3 17689-77-9 Ethyltriacetoxysilane See acetic acid comments.
PAGE 5
MATERIAL SAFETY DATA SHEET PREMIER BUILDING SOLUTIONS, INC. Page 5 of 10 Version: 1.3 Revision Date 01/07/2014 XTRABOND 250 100% RTV ACETOXY SILICONE SEALANT Suitable Respirator: Respiratory protection is not needed under ambient conditions. If vapor is generated when material is heated or handled, the following is advised. General and local exhaust ventilation is recommended to maintain vapor exposures below recommended limits.
PAGE 6
MATERIAL SAFETY DATA SHEET PREMIER BUILDING SOLUTIONS, INC. Page 6 of 10 Version: 1.3 Revision Date 01/07/2014 XTRABOND 250 100% RTV ACETOXY SILICONE SEALANT pH: Not determined. Volatile Content: Not determined. Flash Point: > 212 °F / > 100 °C (Closed Cup) Autoignition Temperature: Not determined. Flammability Limits in Air: Not determined. VOLATILE ORGANIC COMPOUNDS (VOC): Product complies with State and Federal regulations for VOC content.
PAGE 7
MATERIAL SAFETY DATA SHEET PREMIER BUILDING SOLUTIONS, INC. Page 7 of 10 Version: 1.3 Revision Date 01/07/2014 XTRABOND 250 100% RTV ACETOXY SILICONE SEALANT Complete information is not yet available. Ecotoxicity Classification Criteria Hazard Parameters (LC50 or EC50) Acute Aquatic Toxicity (mg/L) Acute Terrestrial Toxicity High <=1 <=100 Medium >1 and <=100 >100 and <=2000 Low >100 >2000 This table is adapted from "Environmental Toxicology and Risk Assessment", ASTM STP 1179, p.34, 1993.
PAGE 8
MATERIAL SAFETY DATA SHEET PREMIER BUILDING SOLUTIONS, INC. Page 8 of 10 Version: 1.3 Revision Date 01/07/2014 XTRABOND 250 100% RTV ACETOXY SILICONE SEALANT None. Section 304 CERCLA Hazardous Substances (40 CFR 302): None. Section 311/312 Hazard Class (40 CFR 370): Acute: Chronic: Fire: Pressure: Reactive: Yes No No No No Section 313 Toxic Chemicals (40 CFR 372): None present or none present in regulated quantities.
PAGE 9
MATERIAL SAFETY DATA SHEET PREMIER BUILDING SOLUTIONS, INC. Page 9 of 10 Version: 1.3 Revision Date 01/07/2014 XTRABOND 250 100% RTV ACETOXY SILICONE SEALANT New Jersey CAS Number Wt % Component Name 70131-67-8 <= 82.0 Dimethyl siloxane, hydroxy-terminated 63148-62-9 <=8.0 Polydimethylsiloxane 7631-86-9 <=7.9 Silicon dioxide 64742-46-7 5.0 - 10.0 Hydrotreated middle petroleum distillates 1332-37-2 <=3.2 Iron oxide 13463-67-7 <=2.2 Titanium dioxide 7429-90-5 <=1.
PAGE 10
MATERIAL SAFETY DATA SHEET PREMIER BUILDING SOLUTIONS, INC. Page 10 of 10 Version: 1.3 Revision Date 01/07/2014 XTRABOND 250 100% RTV ACETOXY SILICONE SEALANT REGULATIONS. THIS MSDS CONTAINSALL INFORMATION REQUIRED BY THOSE REGULATIONS. 16. OTHER INFORMATION . Note: The responsibility to provide a safe workplace remains with the user.