teasmade instruction manual STM100N Downloaded from www.Manualslib.
Thank you for purchasing this Swan TEASMADE. With this iconic product, you are joining a unique group of people – going back some 70 years or more – who just have to be woken with a nice, hot cup of tea in the morning – and who can blame you. Even if tea isn’t your thing and you prefer a cup of (that new fangled) coffee in the morning, not to worry. This modern, 21st century TEASMADE can make coffee too! But you can’t get the Internet on it – just yet.
12. Do not allow the cord to touch hot surfaces and do not place on or near a hot gas or electric burner or in a heated oven. 13. Do not use the appliance on a gas or electric cooking top or over or near an open flame. 14. Use of an extension cord with this appliance is not recommended. However, if it is necessary to use an extension lead, ensure that the lead is suited to the power consumption of the appliance to avoid overheating of extension cord, appliance or plug point.
Before first use Lid Reading Light Remove all packaging from the product and connect to the 230-240V AC mains supply. 1. Fill the ceramic jug with water to 1” (25mm) below top. 2. Open the lid and remove the tank cap by turning it anti-clockwise 3. Pour the water from the jug into the tank and replace the tank cap by turning it clockwise. 4. Place the ceramic jug back on it’s stand on the TEASMADE, ensuring that it is resting firmly against the safety switch 5.
Setting the alarm only The dot on the clock face indicates the alarm time. To set the alarm time press the ALARM SET button. Each press will advance the alarm time by 1 minute. To fast forward the alarm time, press and HOLD the ALARM SET button. Once you release the ALARM SET button, the clock will revert back to the current time and the alarm dot will be displayed. Note: there is no am or pm setting. The TEASMADE uses a 12 hour clock. Once the alarm time is set, press the ALARM button so that it lights up.
Reading light To operate the reading light simply press the reading light button Reading light Tea now Automatic tea Alarm Alarm set Timer Cleaning and maintenance Ensure the product is unplugged from the mains and completely cooled before cleaning. The pot should be cleaned daily with warm soapy water, then rinsed with clean water. Do not leave water in the tank for long periods. Wait until the product has cooled before emptying the tank.
UK Plug wiring instructions The wires in the mains lead are coloured in accordance with the following code: BLUE NEUTRAL BROWN LIVE GREEN/YELLOW EARTH As the colours of the wire in the mains lead of this appliance may not correspond with the colour markings identifying the terminals on your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured black.
Wakey, wakey!! We’re on Search ‘Swan Teasmade’ Upload photos of your Teasmade to share with the rest of the gang Join the community! Visit www.swan-brand.co.uk for more great Swan products and history of the Swan Brand Downloaded from www.Manualslib.