Instruction Manual

MOUNTING THE DEVICES

Indoor Alarm Receiver

• The Indoor Alarm Receiver can be completely freestanding or mounted. The

operating distance between the Indoor Alarm Receiver and the Alert Sensor/

Doorbell is up to 100ft/30m but the range may vary depending on local conditions.

• As it is also completely freestanding, you may nd it more convenient to place it on

a shelf or table. One of the benets of a battery-powered wireless receiver is that

if you have a large house, you can bring the receiver with you. No more missing

visitors because you were all the way at the back of the house.

• If you would like to mount the Indoor Alarm

Receiver, simply attach two screws to the

wall using the supplied mounting template

as a guide (if mounting on drywall/masonry,

install wall anchors rst). Do not insert the

screws all the way in but leave a small gap

between the screw head and wall so that

you can hang the Indoor Alarm Receiver on

the screws using the keyhole slots on the

back of the Indoor Alarm Receiver.

Alert Sensor

• The Alert Sensor, under typical conditions, is designed to detect people and vehicles

moving within the detection area of up to 13ft/4m. The LED indicator blinks once

when movement is detected.

• For optimal coverage, mount the Alert Sensor approximately 6.5ft/2m above the

ground, pointing slightly downwards at an angle where the most likely approach

path of visitors and vehicles is across the front of the Alert Sensor. Motion

detection is less effective when movement is directly towards or away from the

front of the Alert Sensor.

• Avoid placing the Alert Sensor in a position where it will face direct sunlight, objects

that produce heat such as replaces, heaters and air conditioners, or reective

surfaces such as windows which can cause sunlight to be reected onto the PIR

detector.

• Avoid mounting on surfaces that can move or vibrate.

More sensitive Less sensitive

13 ft / 4m

(Actual detection range is subject to

environmental conditions)