Instruction Manual

INTRODUCTION
EN
INTRODUCTION
7
1 2
3 64 75 8 9
10
DVR Rear Panel
Name Function
Power Input This is where you connect the supplied DC 12V power adapter to your DVR.
PTZ For connecting RS485 cables to control a PTZ (pan, tilt, zoom) device on the DVR.
AUDIO OUT
RCA port for audio output. Used to connect your speaker or headphone.
USB For connecting the USB mouse.
HDMI
The primary video output of the DVR. For the highest possible video output quality, we
suggest using this output on a use a monitor/television capable of displaying Full HD 1080p.
eSATA
To connect an external hard drive which will act as a live recording drive in the same
manner as the installed HDD.
VGA
For connecting a television or PC monitor with a VGA input.
LAN Connect to your home network router using an Ethernet cable to access the Internet.
AUDIO IN RCA ports for connecting microphones to record audio.
VIDEO IN
These are your video inputs where you connect your cameras via the BNC connector to
display video feed on your TV. The channels are labelled by numbers in the same order as
they appear on your DVR’s Live View interface.
1
4
5
6
7
8
9
10
2
3