User Manual

10
Click for contents
Live View Icons & Controls (16 channel model)
Menu Bar
1. Click this to open the Main Menu.
2. Manually lock your DVR to prevent access
to the Main Menu when “Menu Timeouts” is
turned off.
3. Four camera view.
4. Nine camera view.
5. Twelve camera view.
6. Sixteen camera view.
7. Select from a variety of different camera lay-
outs available.
8. Click this to repeatedly cycle through each
video channel full screen. Each video channel
will be displayed for 5 seconds.
9. Click this to change the volume or mute the
audio (click the speaker icon to mute).
10. Click this to enter playback mode.
11. Click this to enter the Startup Wizard.
The Camera Toolbar provides quick access to
video playback, manual capture, zoom, PTZ
and the ability to change image settings.
To ensure the integrity of your recordings,
enter your password and select “Shutdown”
when powering off your DVR.
Camera/Group: In single or four camera
view, move the mouse to the far left or right
to reveal the camera/group button. You
can cycle through each camera or group of
cameras to view.
Status Icons
This icon indicates that the camera is being
recorded (either manually or triggered by
motion).
This icon indicates that your DVR is detect-
ing motion from the camera.
This icon indicates that your DVR is record-
ing at 720p (1280 x 720) resolution.
This icon indicates that your DVR is record-
ing at 1080l (960 x 1080) resolution.
This icon indicates that the channel
has lost the feed from its camera.
This icon indicates that your DVR is record-
ing at 1080p (1920 x 1080) resolution.
This icon indicates that your DVR
does not have a hard drive or it fails to
detect the drive that is installed.
This icon indicates that your PIR camera
has detected one or more warm objects.
NO HDD
PIR
VIDEO LOSS
This icon indicates that your DVR is record-
ing at 3 megapixel (1920 x 1536) resolution.