User Manual

14
Click for contents
Display: Live
Channel: Select a camera that you would like to edit.
Channel Name: Enter a name for the camera you’ve selected. It can be up to
8 characters in length.
Show Name: Leave this enabled to display the camera name in Live View
mode, otherwise click the drop down menu to disable.
Record Title: It’s recommended to leave this enabled, as a timestamp will
be embedded on all video recordings. This allows you to easily identify when
events have occurred. You can disable this if you wish.
OSD Position: Allows you to change the position of the camera name on the
Live View screen. Click the “Setup” button then use the mouse to reposition
the camera name. Right-click the mouse then click “Save”.
Color: Click the “Setup” button to access the image adjustment tools:
Hue: This changes the color mix of the image.
Bright: This changes how light the image appears to be.
Contrast: This increases the difference between the blackest black and the
whitest white in the image.
Saturation: This alters how much color is displayed in the image.
Use the slider to adjust each setting. When finished, click the “Save” button
then click “Close” to exit.
Please note: Any changes made to the image settings available will af-
fect your recordings.
(continued on next page)
· Don’t forget to click “Save”
to apply settings.
· Use the “Copy” function to
apply all settings to the other
cameras.
· Click the “Default” button to
revert back to default settings.
· Click the “Close” button to
exit the Main Menu.
The configuration op-
tions available allow you
to name each camera
relevant to where it has
been installed as well
as the ability to adjust
image settings such as
brightness and contrast.
You can also enable
covert mode to hide the
camera’s image in Live
View mode.