User Manual
Table Of Contents
- Important Information
- Password Recovery
- Live View
- Live View Mode (4 & 8 channel model)
- Live View Icons & Controls (4 & 8 channel model)
- Live View Mode (16 channel model)
- Live View Icons & Controls (16 channel model)
- Main Menu
- Menu Layout
- Camera Configuration
- Display: Live
- Display: Privacy Zone
- Creating a Privacy Mask
- Record: Mainstream (720p)
- Record: Mainstream (1080p)
- Record: Mainstream (3 Megapixel)
- Record: Substream
- Alarm: Motion
- Motion Detection Setup
- Motion Detection Tips
- Thermal-Sensing Camera Tips
- Device: PTZ
- Controlling your PTZ Camera
- Creating a Preset
- Recording Configuration
- Record: Record
- Record: Schedule
- Capture: Capture
- Capture: Schedule
- Playback & Backup
- Search: General
- Playback Interface
- Playback: Smart
- Search: Events
- Search: QuickShot
- Playing a Slideshow
- Search: QuickReview
- QuickReview Playback
- System Configuration
- Display: Output
- Network: Network
- Network: Email
- Network: Email Schedule
- Network: DDNS
- Network: RTSP
- System: NTP
- Device: HDD
- Device: S.M.A.R.T.
- System: General
- System: DST
26
Click for contents
Alarm: Motion
Push: Click the checkbox to enable push notifications via the HomeSafe View
app (alarm notification has to be enabled - see “Alarm Mode” in the Home-
Safe View manual for more information). This option is only available if you
have one or more thermal-sensing cameras connected to your DVR.
Record Channel: You can instruct your DVR to disable recording when motion
has been detected. Your DVR will still alert you by displaying the motion icon
on-screen and by email if this option has been enabled. Click the checkbox
to disable.
Analog Channels: This option instructs your DVR to trigger additional cam-
eras to start recording when motion has been detected. Click the checkbox
to select all cameras or click on the individual camera number that you want
to trigger for recording.
· Don’t forget to click “Save”
to apply settings.
· Use the “Copy” function to
apply all settings to the other
cameras.
· Click the “Default” button to
revert back to default settings.
· Click the “Close” button to
exit the Main Menu.