User Manual

35
Click for contents
Record: Schedule
Channel: Select a camera that you would like to edit.
Normal: Your DVR will constantly record for a set period of time.
Motion: Your DVR will only record when motion has been detected from one
or more cameras.
Each square represents 30 minutes. Using the mouse, select the desired re-
cording mode then click on a particular square to change or click and drag
the mouse over the squares corresponding to your desired time period. The
same action can also be applied if Normal or Motion recording is not required
(on one or more sections that have recording enabled).
In the above example, a Motion recording schedule has been created for
12:00 a.m. to 06:00 p.m. and a Normal recording schedule for 06:00 p.m. to
12:00 a.m. Sunday to Saturday.
To search for and play previous Normal and Motion recordings (see page 39
- Search: General).
· Don’t forget to click “Save”
to apply settings.
· Use the “Copy” function to
apply all settings to the other
cameras.
· Click the “Default” button to
revert back to default settings.
· Click the “Close” button to
exit the Main Menu.
By default, a Motion
schedule has been en-
abled for each camera
connected, however you
can change the sched-
ule to suit your needs.
The schedule is pre-
sented as a 24-hour 7
days a week grid and is
color coded to represent
the event type.