User Manual
Table Of Contents
- Important Information
- Password Recovery
- Live View
- Live View Mode (4 & 8 channel model)
- Live View Icons & Controls (4 & 8 channel model)
- Live View Mode (16 channel model)
- Live View Icons & Controls (16 channel model)
- Main Menu
- Menu Layout
- Camera Configuration
- Display: Live
- Display: Privacy Zone
- Creating a Privacy Mask
- Record: Mainstream (720p)
- Record: Mainstream (1080p)
- Record: Mainstream (3 Megapixel)
- Record: Substream
- Alarm: Motion
- Motion Detection Setup
- Motion Detection Tips
- Thermal-Sensing Camera Tips
- Device: PTZ
- Controlling your PTZ Camera
- Creating a Preset
- Recording Configuration
- Record: Record
- Record: Schedule
- Capture: Capture
- Capture: Schedule
- Playback & Backup
- Search: General
- Playback Interface
- Playback: Smart
- Search: Events
- Search: QuickShot
- Playing a Slideshow
- Search: QuickReview
- QuickReview Playback
- System Configuration
- Display: Output
- Network: Network
- Network: Email
- Network: Email Schedule
- Network: DDNS
- Network: RTSP
- System: NTP
- Device: HDD
- Device: S.M.A.R.T.
- System: General
- System: DST
36
Click for contents
Capture: Capture
Channel: Select a camera that you would like to edit.
Auto Capture: When enabled, your DVR will take a snapshot each time an
event occurs.
Stream Mode: Leave the default selection. This will save each snapshot at
the camera’s native resolution.
Normal Interval: The length of time that must elapse before a snapshot is
taken. For example, when setting a Normal capture schedule, a snapshot
will be taken every 5 seconds using the default selection. Adjust accordingly.
Alarm Interval: When setting a Motion capture schedule, a snapshot will be
taken each time motion has been detected according to the interval selected.
Adjust accordingly.
Manual Capture: Enable this feature if you would like to manually take a
snapshot using the Manual Capture button on the camera toolbar.
As this is an added feature, a capture schedule is not enabled by default. To
enable this (see page 37 – Capture: Schedule).
· Don’t forget to click “Save”
to apply settings.
· Use the “Copy” function to
apply all settings to the other
cameras.
· Click the “Default” button to
revert back to default settings.
· Click the “Close” button to
exit the Main Menu.
As an added feature,
you can enable and set
a schedule for your DVR
to take a snapshot each
time an event occurs.
This is particularly use-
ful for finding motion
events quickly and can
also be used for differ-
ent purposes such as
time lapse photography.