User Manual

42
Click for contents
Playback: Smart
CH1 CH2
06/03/2017 09:54:50 AM
CH3 CH4
06/03/2017 09:54:50 AM
06/03/2017 09:54:50 AM06/03/2017 09:54:50 AM
Play
1
2
CH1
06/03/2016 09:54:50 AM
3
4
5
6
7
Smart mode allows you to define one or more specific areas of the video
which then makes it easier to find what you are searching for. For example,
you may have movement on the left-hand side of the yard, but you want to see
what is happening on the right-hand side. Define one or more areas where
required then search to play video based on those defined areas.
To commence Smart mode, select a camera that you would like to search on
(if the video is not playing, click play).
1. You can leave the default selection or you can click each dialogue box to
enter a specific start and end time.
2. Click this button to define one or more areas that you want to search for.
The camera will be shown full screen and the Smart mode controls will be
visible.
3. To move the controls, click and hold here then reposition it.
4. Click this to define a full screen detection area.
5. Click this to delete all areas created.
6. Click this to search and play video based on the areas defined.
7. Click this to return to the playback interface.
(continued on next page)