User Manual
Table Of Contents
- Important Information
- Password Recovery
- Live View
- Live View Mode (4 & 8 channel model)
- Live View Icons & Controls (4 & 8 channel model)
- Live View Mode (16 channel model)
- Live View Icons & Controls (16 channel model)
- Main Menu
- Menu Layout
- Camera Configuration
- Display: Live
- Display: Privacy Zone
- Creating a Privacy Mask
- Record: Mainstream (720p)
- Record: Mainstream (1080p)
- Record: Mainstream (3 Megapixel)
- Record: Substream
- Alarm: Motion
- Motion Detection Setup
- Motion Detection Tips
- Thermal-Sensing Camera Tips
- Device: PTZ
- Controlling your PTZ Camera
- Creating a Preset
- Recording Configuration
- Record: Record
- Record: Schedule
- Capture: Capture
- Capture: Schedule
- Playback & Backup
- Search: General
- Playback Interface
- Playback: Smart
- Search: Events
- Search: QuickShot
- Playing a Slideshow
- Search: QuickReview
- QuickReview Playback
- System Configuration
- Display: Output
- Network: Network
- Network: Email
- Network: Email Schedule
- Network: DDNS
- Network: RTSP
- System: NTP
- Device: HDD
- Device: S.M.A.R.T.
- System: General
- System: DST
55
Click for contents
Network: Email Schedule
Motion: If email alerts have been enabled for motion detection, you can
change the schedule on when your DVR can send those alerts. For exam-
ple, you may only want to receive motion alerts during the day but not in the
evening. A different schedule can be created for each camera.
Exception: There are three event types that your DVR will detect as an excep-
tion - no space left on the hard drive, a hard drive error and if one or more
channels has lost the feed from its camera (see page 65 - Advanced: Events).
It’s recommended to leave the default schedule in place in case there is an
exception that you need to be alerted to.
Channel: Select a camera that you would like to edit.
Each square represents 30 minutes. Using the mouse, click on a particular
square to change or click and drag the mouse over the squares correspond-
ing to your desired time period.
In the above example, a Motion email alert schedule has been created for
08:00 a.m. to 07:00 p.m. Motion alerts outside of these times will not be
emailed.
· Don’t forget to click “Save”
to apply settings.
· Use the “Copy” function to
apply all settings to the other
cameras.
· Click the “Default” button to
revert back to default settings.
· Click the “Close” button to
exit the Main Menu.