User Manual
Table Of Contents
- Important Information
- Password Recovery
- Live View
- Live View Mode (4 & 8 channel model)
- Live View Icons & Controls (4 & 8 channel model)
- Live View Mode (16 channel model)
- Live View Icons & Controls (16 channel model)
- Main Menu
- Menu Layout
- Camera Configuration
- Display: Live
- Display: Privacy Zone
- Creating a Privacy Mask
- Record: Mainstream (720p)
- Record: Mainstream (1080p)
- Record: Mainstream (3 Megapixel)
- Record: Substream
- Alarm: Motion
- Motion Detection Setup
- Motion Detection Tips
- Thermal-Sensing Camera Tips
- Device: PTZ
- Controlling your PTZ Camera
- Creating a Preset
- Recording Configuration
- Record: Record
- Record: Schedule
- Capture: Capture
- Capture: Schedule
- Playback & Backup
- Search: General
- Playback Interface
- Playback: Smart
- Search: Events
- Search: QuickShot
- Playing a Slideshow
- Search: QuickReview
- QuickReview Playback
- System Configuration
- Display: Output
- Network: Network
- Network: Email
- Network: Email Schedule
- Network: DDNS
- Network: RTSP
- System: NTP
- Device: HDD
- Device: S.M.A.R.T.
- System: General
- System: DST
64
Click for contents
Advanced: Maintain
Default User: Admin is the default user account. If multiple user accounts
have been created, click the drop down menu to disable.
Auto Reboot: It is recommended to leave this enabled, as it maintains the
operational integrity of your DVR.
Reboot: Choose an appropriate day and time to reboot your DVR.
Update: Click this button to upgrade the firmware from a USB flash drive.
Select the firmware file then “OK” to confirm. When the firmware upgrade
has completed, your DVR will reboot automatically.
Load Settings: Click this button to import a configuration file containing all
the settings that you have customised.
Load Default: Click this button to restore factory default settings.
Save Settings: Click this button to export a configuration file containing all
the settings that you have customised.
· Don’t forget to click “Save”
to apply settings.
· Click the “Default” button to
revert back to default settings.
· Click the “Close” button to
exit the Main Menu.