Instructions / Assembly

12
Pairing the Camera
(Continued on the next page)
Swann Indoor Camera (SWWHD-INDCAM)
Connect your camera to a power outlet, then
tap Continue.
The rst time you power up the camera, it
automatically goes into pairing mode—the LED is
blinking blue. Tap Yes to continue.
If the LED is not blinking blue, tap No and follow
the on-screen instructions to put the camera into
pairing mode.
Before you start, make sure you have access to a
power source within the coverage area of your
Wi-Fi router. To proceed, tap Get Started.
Connect to the camera's temporary Wi-Fi hotspot.
Tap Go to Settings to access your phone's Wi-Fi
setting and connect to the camera's hotspot named
“SwannCam-SWI-xxxx”, and then return to the app.
Note: For iOS users, go to Settings > Wi-Fi on your
device, connect to the "SwannCam-SWI-xxxx"
network, then return to the app.
?