Instructions / Assembly

14
The rst time you power up the camera, it automatically
goes into pairing mode — the LED is blinking blue.
Tap Yes to continue.
If the LED is not blinking blue, tap No and follow the on-
screen instructions to put the camera into pairing mode.
Connect to your camera's temporary Wi-Fi hotspot. Tap
Go to Settings to access your phone's Wi-Fi setting
and connect to the Wi-Fi network named “SwannCam-
SWO-xxxx”, then return to the app. Note: For iOS
device, go to Settings > Wi-Fi on your device, connect
to the "SwannCam-SWO-xxxx" network, and then
return to the app.
Connect your camera to a power outlet, then
tap Continue.
Pairing the Camera
(Continued on the next page)
Swann Outdoor Camera (SWWHD-OUTCAM)
Before you start, make sure you have access to a
power source within the coverage area of your
Wi-Fi router. To proceed, tap Get Started.
?