Instructions / Assembly

(SWWHD-FLOCAM model only) The light control tile. Tap to manually turn on or o the camera's oodlights. Drag up

or down slowly within the tile to increase or dim the brightness of the oodlights.

Note: The camera's oodlights will automatically turn on when motion is detected at night. You can adjust how

long the oodlights will stay on when triggered by motion detection via the camera's Settings > Light tab. For more

information, see "My Cameras: Settings: Light tab (for Floodlight Camera)" on page 40.

To record motion events, make sure to arm the camera using Modes. The

icon is displayed in the camera tile when

the camera is armed.

(SWWHD-FLOCAM model only) The siren control tile. Tap to manually turn on or o the camera's built-in siren. If left

on, the siren automatically turns o according to the siren duration specied in the camera's Settings > Siren tab.

You can adjust the volume of the siren. Go to the camera's Settings > Siren tab, then under Volume, choose one of

the following volume levels - Low, Medium or High. For more information about the available siren settings, see "My

Cameras: Settings: Siren tab (for Floodlight Camera)" on page 39.

Note: Please exercise discretion and good judgment when using the siren as it is very loud. Make sure to comply with

all local noise regulations.

Indicates whether the cameras are operating in Home, Away or Night mode. Tap the icon to open the

modes selection panel and switch modes. You can customize modes and congure whether to arm or disarm

individual cameras for each mode. For more information, see "Modes: Customizing your Modes" on page 19.

Open the Activity screen and access your cameras' video event history to view and download recordings. For more

information, see "Activity Screen" on page 29.

Camera Dashboard