Manual Hardware

ManualsBrandsSwann ManualsElectricalDVR8-4500 AHD 1080p with 2TB and 8 x Bullet White

ENDVR Quick Start Guide

• Getting to know your DVR

• What does this mean?

• Connect your Cameras

• Connect the DVR to your Home Network

• Connect the Mouse

• Connect the DVR to your HDTV

• Connect the DVR to your Monitor (optional)

• Connect the Power Adapter

Welcome! Lets get started.

Summary of content (9 pages)

PAGE 1
DVR Quick Start Guide EN Welcome! Lets get started.
PAGE 2
Getting to know your DVR Congratulations on the purchase of your Swann DVR. This quick start guide will assist you on getting your DVR up and running as soon as possible. We recommend that you connect everything and give it a try before you do a permanent installation, to make sure nothing was damaged during shipping. On the other side is a detailed connection map which illustrates the various connections on the DVR.
PAGE 3
What does this mean? Here are explanations for the various connections and lights on the DVR - 10) HDD LED - This will flash when the hard drive is working. 1) Video In - Connect the included cameras here. 11) NET LED - This will flash when there is network activity. 2) HDMI - Connect this to your digital TV with a HDMI input (HDMI cable included). 3) VGA (optional) - If you have a digital TV or a monitor with a VGA connection, connect this to an available input.
PAGE 4
Connect your Cameras 1 Video & Power Cable 1. Connect the video output and power input connection on the camera to the corresponding connections on the supplied video & power cable. Power Input 1 2. Connect the supplied power splitter to the other end of the video & power cable. This provides power to multiple cameras using a single power adapter. Video Output 4. Connect the video output on the video & power cable to each video input on the DVR. Twist the video connection to lock it in place.
PAGE 5
Connect the DVR to your Home Network 2 Connect the supplied Ethernet cable (1) to the LAN connection on the DVR then connect the other end to a spare port on your router or wireless access point. 1 2 5 6 VIDEO IN USB Intern et 4 3 2 3 4 7 8 AUDIO IN AUDIO OUT HDMI VGA LAN & USB 12V 1 It’s important that you do this as this allows you to access the DVR from your smartphone or tablet and to send you email notifications.
PAGE 6
Connect the Mouse 3 Connect the supplied mouse (1) to one of the available USB ports. You can connect a flash drive or hard drive (not supplied) to the other USB port to back up your video recordings and to perform a firmware update. 1 2 5 6 VIDEO IN 3 4 7 8 AUDIO IN AUDIO OUT HDMI VGA LAN & USB 12V 1 Please note, Bluetooth and wireless mice and trackpad devices are not supported. For USB flash drive and hard drive devices, both FAT32 and NTFS file formats are supported.
PAGE 7
Connect the DVR to your HDTV 4 Connect the supplied HDMI cable to the HDMI output on the DVR then connect the other end to a spare HDMI input (1) on your HDTV. Make sure the video input on the HDTV matches the physical connection used to connect the DVR.
PAGE 8
Connect the DVR to your Monitor (optional) 5 If you have a Monitor with a VGA connection, connect a VGA cable (not supplied) to the VGA output on the DVR then connect the other end to the VGA input (1) on your Monitor. 1 A VGA cable and monitor are not required when using the HDMI cable.
PAGE 9
Connect the Power Adapter 6 Connect the supplied power adapter (1) to the power input on the DVR first (this will minimise static discharge) then connect the power adapter to a spare wall socket. 1 2 5 6 VIDEO IN 3 4 7 8 AUDIO IN AUDIO OUT HDMI VGA LAN & USB 12V 1 All the connections have now been completed. You’re now ready to run through “The Setup Wizard” quick start guide to configure the DVR.