Firmware, Drivers & Software

10 11 12
13 14 15
16 17 18
Confused on which location to install your cameras? The cameras included with your security system can be installed
in a number of different locations. Camera location can depend on the following:
1. Distance from the camera to your DVR.
2. Environmental conditions.
3. Lighting conditions.
4. The area that you would like to monitor.
When you position cameras correctly, you can eliminate the need for additional cameras to cover your target area and
maximise the efficiency of your security system. On the flip side, if you position cameras incorrectly, it can lead to blind
spots or to have objects that are not visible or too far for the cameras to view in detail. Keep these points in mind to get
the most out of your security system.
Mount cameras at an elevated position: Mounting your cameras at an elevated position, can keep your cameras out
of range of vandals or would be burglars. It also allows your camera to have a high vantage point increasing its viewing
area.
Cover your target area: When placing cameras, make sure you provide ample coverage, but not in excess. For exam-
ple, if you are trying to cover a backyard gate, don’t zoom in to only have the gate in frame. Position the camera to cover
part of your backyard so you capture as much area as possible without sacrificing video quality.
Your backyard is mostly filled with a shed with lawn and garden tools, recreational equipment and children’s toys. It’s
a good idea to install a camera so that you have an entire overview of the backyard. Like the cameras installed at the
front of the house, it is recommended to install the camera where the roof meets the wall of the house. If you have a
side gate or more than one entrance to the backyard, you may want to have an additional camera focused to that area.
This will focus on the side
entrance.
This will focus on the entire
backyard.
When installing cameras outside, it is recommended to install the provided data & power cable away from the elements
so it prevents them from deteriorating over time. Whilst cabling, avoid areas that have a high amount of electrical
equipment where electrical interference is expected. This can create all types of interference to the video picture. Also
avoid sharp bends, which can affect cable impedance and cause interference to the video picture. If you’re using cable
ties, do not over tighten them and avoid using a staple gun to secure as this can potentially damage the cable. There
may be circumstances where you have to join multiple cables together. Go to your hardware store, purchase some
electrical tape and use this to seal the connection(s) between each cable. This will prevent moisture and dust forming
on the connection(s).
Summary
1. Protect the cable from the elements to avoid deterioration.
2. Avoid electrical equipment where electrical interference is expected.
3. Avoid sharp bends and do not bend the cable greater than 90 degrees.
4. Do not over tighten when using cable ties.
5. Avoid using a staple gun to secure the cable to a wall.
6. Do not stretch or apply force greater than 25lbs/11kgs.
7. Use electrical tape to seal the connection(s) when joining multiple cables together.
To monitor the front of the house, whether it is the front garden, driveway or the entrance to your garage, it is
recommended to install the camera where the roof meets the walls of the house, as illustrated below. This will shelter
the camera from the elements, have a better field of view, and less likely to be vandalized.
You may need to install multiple cameras if you want to focus
on specific areas that you would like to monitor, for example,
one for the driveway, the other on the garage entrance.
Install the camera
where the roof meets
the walls of the house.
It has been found that most burglars will enter your home through the front door, so it is very important that you install
a camera here. It is recommended to install the camera either above the door or to the side space permitting. Mount
the camera in an elevated position so it is out of range of vandals or would be burglars. Placing the camera at a slight
angle will allow you to see who is approaching your front door as well as giving you the ability to have facial recognition.
Place the camera at a slight angle.
Most burglars will knock on the front door
first to see if anyone is at home.
Have a look at the image(s) on your
DVR first before installing the cameras
permanently.
It’s recommended that you place cameras inside the house that have high traffic areas such as entry and exit points
(front door), hallways and staircases (if applicable). Other ideal locations are next to windows and rooms that have high
priced valuables such as electronics, antiques and jewellery.
The Field of View produced by a camera is the area that the camera can see. It is an important factor to consider as it
determines not just what the camera can see, but also the level of detail that is visible at a given distance. Cameras
with a smaller lens, also known as a wide-angle lens, produce a greater Field of View than cameras with a larger lens.
This means that the camera can see a large area but the objects will appear smaller within the scene area. This is
useful if you want to monitor an entire room or a yard. Cameras with a larger lens also known as narrow-angle have a
smaller Field of View. They can see a limited area, but objects will appear larger within the scene area. This is useful if
you want to monitor a specific target such as a doorway or entrance.
Fixed Lens vs. Varifocal Lens
A Fixed Lens is where the camera’s focal length
(Field of View) is permanently set and cannot be
adjusted by the user.
A Varifocal Lens is where the camera’s lens can
be manually adjusted by the user. This allows for
greater flexibility to optimize the camera picture for
your specific needs.
Wide Angle
Fixed Lens
3.6mm
Narrow Angle
Fixed Lens
6.0mm
Lighting
• For best results do not point the camera towards a light source.
• Pointing the camera towards a glass window intending to see outside may result in a poor image because of glare
and lighting conditions inside and outside.
• Don’t place the camera in a shaded area that is looking into a well-lit area as this will result in a poor display. The
light to the sensor located at the front of the camera needs to be the same as the light at the focal target for best
results.
• As the camera uses infrared LEDs to see at night, it’s recommended to clean the lens from time to time if the picture
degrades.
Environment
• Make sure the power connections are not directly exposed to water or moisture and shielded from other outdoor
elements.
• Weatherproof only means that the camera can be exposed to weather such as rain and snow. Weatherproof cameras
cannot be submerged under water.
• Do not expose the camera where rain and snow will hit the lens directly.
• Cameras geared for cold weather may work in extreme conditions as low as -25° as the camera produces heat
when plugged in.
Have a look at the image(s) on your
DVR first before installing the cameras
permanently.
Have a look at the image(s) on your
DVR first before installing the cameras
permanently.
Have a look at the image(s) on your
DVR first before installing the cameras
permanently.
This camera will focus
on the garage entrance.
This camera will
focus on the driveway
entrance.
10
11
12 15
14
13 16
17
18
General Configuration
Front of House and Driveway
Front of House and Driveway
Front Door
Backyard and Side Entrance
Indoors
Camera Field of View
Lighting and Environment Tips
Camera Cables